Description: 2K LCSS Initialization Failure RAP When an initialization command is received from the machine, the units are initialized in two stages: • The following units are initialized sequentially: 1. If the staple head is not at the home position, it is driven to the home position 2. If the stapling unit is not at the home position, it is driven to the home position 3. If the ejector is not at the home position, it is driven to the home position • The following units are then initialized simultaneously: 1. If the front tamper is not at the home position, it is driven to the home position 2. If the rear tamper is not at the home position, it is driven to the home position 3. If the hole punch is not at the home position, it is driven to the home position 4. If the paddle is not at the home position, it is driven to the home position 5. If the stacker is not at the home position, it is driven to the home position NOTE: The staple cartridge must be fully pushed home.
Remedy: Refer to. Check that the software heartbeat is present on LED 1. The LED should flash twice per second if the 2K LCSS software is running. If necessary, re-load the 2K LCSS software, refer to GP 4 Machine Software. If the initialization sequence fails to place any unit at the home position, refer to the appropriate RAPs: • Front tamper not at home, refer to 11-005-110, 11-006-110, 11-310-110, 11-311-110 Front Tamper Move Failure RAP • Rear tamper not at home, refer to 11-007-110, 11-008-110, 11-312-110, 11-313-110, 11- 319-110 Rear Tamper Move Failure RAP. • Paddle not at home, refer to 11-024-110, 11-025-110 Paddle Roll Failure RAP. • Bin 1 not at home, refer to 11-030-110, 11-334-110, 11-335-110, 11-336-110 Bin 1 Movement Failures RAP. • Punch not at home, refer to 11-043-110, 11-350-110 Hole Punch Operation Failure RAP • Staple head not at home, refer to 11-050-110, 11-360-110 Staple Head Operation Failure RAP. • Stapling unit not at home, refer to 11-053-110, 11-370-110 Staple Head Unit Movement Failure RAP. • Ejector not at home, refer to 11-320-110, 11-322-110 Compiler Ejector Movement Failure RAP.