Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 03B — Xerox WorkCentre 5790

Code: 03B

Description: Mark Service Unavailable RAP Before performing this RAP, any relevant status code RAP must have been performed.
Remedy: 1. Switch off the power, disconnect the power cord and ensure all the P/Js are properly installed on the IOT PWB, PL 1.10 Item 2 and single board controller PWB, PL 3.24 Item 3. 2. Reload the software, GP 4, Machine Software. 3. Ensure that the output device communications cord is connected and secure, at PJ151 on the Power and Control Module at the rear of the machine. 4. Install new components: • Perform OF7 IOT PWB Diagnostics RAP before a new IOT PWB is installed, PL 1.10 Item 2. • Single board controller PWB, PL 3.24 Item 3.

← Xem tất cả mã lỗi Xerox WorkCentre 5790

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie