Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 10-120, 10-121, 10-126 — Xerox WorkCentre 5790

Code: 10-120, 10-121, 10-126

Description: IOT Exit Sensor RAP 10-120 The lead edge of the paper failed to reach the IOT exit sensor within the correct time after the trail edge at the fuser exit switch for an inverted sheet. 10-121 The lead edge of the paper failed to reach the IOT exit sensor within the correct time after the trail edge at the fuser exit switch for an non inverted sheet. 10-126 The trail edge of the paper failed to clear the IOT exit sensor within the correct time.
Remedy: NOTE: Ensure that the door interlock switch is cheated when checking +24V components. Enter dC330 code 10-120 IOT exit sensor, Q10-120. Press Start. Manually actuate the sensor. The display changes. Y↓N→Go to Flag 1. Check Q10-120. Refer to: • GP 11 How to Check a Sensor. • (35-55 ppm). (65-90 ppm). • P/J5, IOT PWB. • 01D +3.3V Distribution RAP. • 01B 0V Distribution RAP. Install new components as necessary: • IOT exit sensor, PL 10.11 Item 13. • Perform OF7 IOT PWB Diagnostics RAP before a new IOT PWB is installed, PL 1.10 Item 2. Enter dC330 code 10-050 inverter nip solenoid, SOL10-050. Press Start. The solenoid energises. Y↓N→Go to Flag 2. Check SOL10-050. Refer to: • GP 12 How to Check a Solenoid or Clutch. • (35-55 ppm). (65-90 ppm). • P/J5, IOT PWB. • P/J17, LVPS. • Fuse, PL 1.10 Item 9, GP 7. • 01G +24V Distribution RAP. • 01B 0V Distribution RAP. Install new components as necessary: • Inverter nip solenoid, PL 10.11 Item 6. • Perform OF7 IOT PWB Diagnostics RAP before a new IOT PWB is installed, PL 1.10 Item 2. Enter dC330 code 10-045 inverter path solenoid, SOL 10-045. Press Start. The solenoid energizes. Y↓N→Go to Flag 3. Check SOL 10-045. Refer to: • GP 12 How to Check a Solenoid or Clutch. • (35-55 ppm). (65-90 ppm). • P/J5, IOT PWB • P/J17, LVPS. • Fuse, PL 1.10 Item 9, GP 7. • 01G +24V Distribution RAP. • 01B 0V Distribution RAP. Install new components as necessary: • Inverter path solenoid, PL 10.11 Item 14. • Perform OF7 IOT PWB Diagnostics RAP before a new IOT PWB is installed, PL 1.10 Item 2. Enter dC330 code 10-030 inverter motor, MOT10-030. Press Start. The jam clearance knob, 2B, PL 10.15 Item 13, is stationary and the motor can be heard. Y↓N→The jam clearance knob, 2B, PL 10.15 Item 13, rotates counterclockwise. Y↓N→Go to Flag 4. Check MOT10-030. Refer to: • GP 10 How to Check a Motor. • P/J4, IOT PWB • P/J45, P/J55 • 01G +24V Distribution RAP • 01E +5V Distribution RAP. • 01B 0V Distribution RAP. Install new components as necessary: • Inverter motor, PL 10.11 Item 11. • Inverter motor driver PWB, PL 10.11 Item 22. • Perform OF7 IOT PWB Diagnostics RAP before a new IOT PWB is installed, PL 1.10 Item 2. Install a new inverter motor driver PWB, PL 10.11 Item 22. Check the following components, refer to GP 7: • Idler roll, PL 10.12 Item 15. • Upper baffle, (35-55 ppm) PL 10.12 Item 23, (65-90 ppm) PL 10.12 Item 22. • Double exit nip roll, PL 10.11 Item 8. • Exit shaft assembly, PL 10.13 Item 4. • Nip split shaft assembly, PL 10.11 Item 4. • The drive gear on the fuser module, (35-55 ppm) PL 10.8 Item 1, (65-90 ppm) PL 10.10 Item 1. • The fuser drive gear on the main drives module, (35-55 ppm) PL 4.17 Item 10, (65-90 ppm) PL 4.12 Item 10. • Check the IOT exit sensor mounting bracket on the nip roll guide, PL 10.11 Item 10. The bracket holds the IOT exit sensor in the correct position, PL 10.11 Item 13. If the fault still occurs, the +24V supply from the LVPS may be faulty. Install a new LVPS, PL 1.10 Item 3.

← Xem tất cả mã lỗi Xerox WorkCentre 5790

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie