Description: HVF Buffer Position Sensor RAP 11-157-171 The paper leading edge is late arriving at the buffer position sensor. 11-161-171 The paper trailing edge is late leaving the buffer position sensor.
Remedy: shows the location of the components. Enter dC330, code 11-157. Manually activate the buffer position sensor, Q11-157. The display changes. Y↓N→Go to Flag 1. Check the sensor, Q11-157. Refer to: • GP 11 How to Check a Sensor. • P/J101, HVF Control PWB • 11A-171 HVF Power Distribution RAP Install new components as necessary: • Buffer position sensor, PL 11.156 Item 2. • HVF Control PWB PL 11.157 Item 2. Enter dC330, code 11-000 to run the entry feed motor 1, MOT 11-000. The motor runs. Y↓N→Go to Flag 2. Check the entry feed motor 1, MOT 11-000. Refer to: • GP 10 How to Check a Motor. • P/J102, HVF Control PWB • 11A-171 HVF Power Distribution RAP Install new components as necessary: • Entry feed motor 1, PL 11.150 Item 2. • HVF control PWB, PL 11.157 Item 2. Check the drive belt on the motor. The drive belt is good. Y↓N→Install a new drive belt, PL 11.150 Item 7. Remove the hole punch assembly. Check the mechanical operation of the hole punch. The hole punch rotates unimpeded. Y↓N→Install a new hole punch assembly, PL 11.153 Item 1. Check the punch head motor, MOT 11-043 and the Punch head home sensor, Q11-350, refer to RAP 11-044-171 to 11-047-171Punch Unit Head and Position. The fault may be intermittent, check for damaged wiring or bad connectors. If necessary install new components: • Buffer position sensor, PL 11.156 Item 2. • Entry feed motor 1, PL 11.150 Item 2. • HVF control PWB, PL 11.157 Item 2. • Hole punch assembly, PL 11.153 Item 1.