Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 11G-120 — Xerox WorkCentre 5790

Code: 11G-120

Description: Copy Damage in the 1K LCSS RAP Use this RAP to identify and correct the causes of copy damage in the 1K LCSS.
Remedy: Check the following: • Look for torn paper in the 1K LCSS paper path. Torn fragments can pass through the IOT and 1K LCSS paper path without causing a problem until they finally wedge themselves at some point. • Ensure that the shaft diverter assembly, PL 11.118 Item 13, operates correctly and has it’s full movement. • Ensure that the jam clearance guide, PL 11.122 Item 6, closes and latches correctly. Check that the magnet at the rear is located and functions correctly. Check the clip at the front is positioned correctly. • Ensure that all idler rolls in the 1K LCSS paper path are free to rotate, particularly those on the jam clearance guide, where the paper turns through 90 degrees. • Ensure that the paper path ribs of the jam clearance guide, PL 11.122 Item 6, and the entry guide cover, PL 11.122 Item 5, are free of “scores” and “nicks”. Check also for contamination and glue from label stock.

← Xem tất cả mã lỗi Xerox WorkCentre 5790

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie