Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 14D — Xerox WorkCentre 5790

Code: 14D

Description: Exposure Lamp Failure RAP (W/O TAG 150), use this RAP when the exposure lamp does not light, and there is no automatic gain control signal. NOTE: For W/TAG 150 machines, go to the 14-703B to 14-706B, 712B, 714B, 718B Failure to Calibrate RAP (W/TAG 150).
Remedy: Go to Flag 2. Check the following voltages at P/J135 on the power distribution PWB. • +24V between pins 1 and 3. • +24V between pins 2 and 4. The voltages are good. Y↓N→Go to 01B 0V distribution RAP, refer to the 24V return and 01G +24V Distribution RAP. Remove the CVT glass and document glass. Remove the PWB cover, 3 screws, PL 14.25 Item 1. Re-install the scanner top cover and GUI, but do not install the screws. Re-connect the power cord, switch on the machine, GP 14. Go to Flag 2. Check for the following voltages at P/J455 on the scanner PWB. • +24V between pins 1 and 2. • +24V between pins 3 and 4. The voltages are good. Y↓N→Check the harness between P/J135 and P/J455. Repair the harness, or install a new harness, PL 14.25 Item 13. Enter the dC330 output code 14-005. The exposure lamp illuminates. Y↓N→WARNING Do not install a fuse of a different type or rating. Installing the wrong type or rating of fuse can cause overheating and a risk of fire. Check the fuse. Refer to, to remove the fuse. The fuse is good. Y↓N→Install a new fuse, PL 14.25 Item 11. Re-install the scanner top cover and GUI, but do not install the screws. Switch on the machine, GP 14. Enter the dC330 output code 14-005. The new fuse fails. Y↓N→The lamp is lit. Y↓N→Go to Flag 1. Check the lamp ribbon harness between P/J456 and P/ J463 for open or short circuits. The lamp ribbon harness is good. Y↓N→Install a new lamp ribbon harness, PL 14.25 Item 10. Install new components in the following order: • Exposure lamp, PL 14.25 Item 9. • Exposure lamp inverter, PL 14.25 Item 12. Perform ADJ 14.1 Optics Cleaning Procedure. Perform ADJ 14.1 Optics Cleaning Procedure. Install new components in the following order: • Exposure lamp, PL 14.25 Item 9 and exposure lamp fuse, PL 14.25 Item 11. • Exposure lamp inverter, PL 14.25 Item 12 and exposure lamp fuse, PL 14.25 Item 11. Perform ADJ 14.1 Optics Cleaning Procedure. Switch on the copier. Go to Flag 1. Disconnect P/J456 and check the following voltages at P/J456 on the scanner PWB: • +24V between pins 1 and 7. • +24V between pins 2 and 8. • +24V between pins 3 and 9. The voltages are good. Y↓N→Install a new scanner PWB, PL 14.25 Item 4. Re-connect P/J456. Disconnect P/J463. Check the following voltages on the inverter end of the harness. • +24V between pins 1 and 7. • +24V between pins 2 and 8. • +24V between pins 3 and 9. The voltages are good. Y↓N→Install a new lamp ribbon harness, PL 14.25 Item 10. Re-connect P/J463. +10V is available at PJ/463 pin 4. Y↓N→Install a new exposure lamp inverter, PL 14.25 Item 12. +10V is available at PJ/456 pin 6. Y↓N→Install a new lamp ribbon harness, PL 14.25 Item 10. Go to Flag 1. Connect a test meter between pins 6 and 1 of P/J456 on the scanner PWB. Enter the dC330 output code 14-005. The voltage changes from +10V to 0V when the code is entered. Y↓N→Install new components in the following order: • Scanner PWB, PL 14.25 Item 4. • Scanner, PL 14.20 Item 1. Check the lamp ribbon harness between P/J456 and P/J463. The lamp ribbon harness is good. Y↓N→Install a new lamp ribbon harness, PL 14.25 Item 10. Install new components in the following order: • Exposure lamp, PL 14.25 Item 9. • Exposure lamp inverter, PL 14.25 Item 12. • Scanner PWB, PL 14.25 Item 4. Perform ADJ 14.1 Optics Cleaning Procedure. The automatic gain control circuit does not see the light from the exposure lamp. Check for misplaced optics mirrors or an obstruction in the light path. If necessary, install a new scanner, PL 14.20 Item 1.

← Xem tất cả mã lỗi Xerox WorkCentre 5790

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie