Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 305-958-00 — Xerox WorkCentre 5845

Code: 305-958-00

Description: SPDH Lift Home Sensor Failure RAP 305-958-00 The lift home sensor does not sense the home position after the tray elevate motor drives the input tray to the home position.
Remedy: Enter dC330 code 005-390 to run the tray elevator motor, MOT05-390. MOT05-390 runs and cycles the tray between the raised and lowered positions. Y↓N→Remove the SPDH rear cover (5 screws). Remove the sensor bracket, PL 5.18 Item 10. Turn over the bracket to access the lift home position sensor. Enter dC330 code 005-307, lift home position sensor, Q05-307. Actuate the sensor using a piece of paper. The display changes. Y↓N→Go to Flag 1. Check Q05-307. Refer to: • GP 11 How to Check a Sensor • P/J462, SPDH PWB • 301D +3.3V Distribution RAP • 301B 0V Distribution RAP Install new components as necessary: • Lift home position sensor, PL 5.18 Item 9 • SPDH PWB, PL 5.10 Item 5 Enter dC330 code 005-309, doc present sensor, Q05-309. Actuate the sensor using the doc present sensor actuator, PL 5.30 Item 6. The display changes. Y↓N→Go to Flag 3. Check Q05-309. Refer to: • GP 11 How to Check a Sensor • P/J462, SPDH PWB • 301D +3.3V Distribution RAP • 301B 0V Distribution RAP Install new components as necessary: • Doc present sensor, PL 5.30 Item 5 • SPDH PWB, PL 5.10 Item 5 Open the top cover to access the stack height sensor, Q05-310. Enter dC330 code 005-310, stack height sensor, Q05-310. Actuate the sensor using the sensor actuating arm. The display changes. Y↓N→Go to Flag 4. Check Q05-310. Refer to: • GP 11 How to Check a Sensor • P/J465 SPDH PWB • 301D +3.3V Distribution RAP • 301B 0V Distribution RAP Install new components as necessary: • Stack height sensor, PL 5.20 Item 4 • SPDH PWB, PL 5.10 Item 5 Go to Flag 2, check the tray elevator motor MOT05-390. Refer to: • GP 10 How to Check a Motor • P/J469 SPDH PWB • 301G +24V Distribution RAP • 301B 0V Distribution RAP Install new components as necessary: • Tray elevator motor, PL 5.18 Item 3 • SPDH PWB, PL 5.10 Item 5 Check the drive components between the tray elevator motor and the input tray shaft assembly. Install new parts as necessary: • Tray elevator reduction gears, PL 5.19 Item 9 Go to SCP 5 Final actions.

← Xem tất cả mã lỗi Xerox WorkCentre 5845

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie