Description: Punch Unit Head and Position RAP 311-044-00-171 The punch head has failed to return to the home position. 311-045-00-171 The punch head has failed to move from the home position. 311-046-00-171 The punch unit has failed to return to the home position. 311-047-00-171 The punch unit has failed to move from the home position.
Remedy: shows the location of the components. Enter dC330 code 011-043 for the punch head motor, MOT11-043. MOT11-043 runs. Y↓N→Go to Flag 2. Check the wiring from the motor to the PWB. Repair as necessary. Check the punch head motor, MOT11-043. Refer to: • GP 10 How to Check a Motor. • P/J502, HVF Control PWB • 311A-171 HVF Power Distribution RAP. Install new components as necessary: • HVF hole punch assembly, PL 11.153 Item 1 • HVF control PWB, PL 11.157 Item 2. Enter dC330 code 011-350 for the punch head home sensor and stack the code 011-043 for the punch head motor. Observe the condition of the sensor on the UI. The display changes. Y↓N→Go to Flag 1. Check the wiring from the sensor to the PWB. Repair as necessary. Check the punch head home sensor, Q11-350. Refer to: • GP 11 How to Check a Sensor. • P/J501, HVF Control PWB • 311A-171 HVF Power Distribution RAP. Install new components as necessary: • HVF hole punch assembly, PL 11.153 Item 1 • HVF control PWB, PL 11.157 Item 2. Enter dC330 code 011-045 for the motor to travel in the forward direction, or enter the code 011-046 for the motor to travel in the reverse direction. MOT11-045 runs. Y↓N→Go to Flag 4. Check the wiring from the motor to the PWB. Repair as necessary. Check the punch unit motor, MOT11-045. Refer to: • GP 10 How to Check a Motor. • P/J502, HVF Control PWB • 311A-171 HVF Power Distribution RAP. Install new components as necessary: • HVF hole punch assembly, PL 11.153 Item 1 • HVF control PWB, PL 11.157 Item 2. Enter dC330 code 011-044 for the punch unit home sensor and stack the code 011-045 or 011- 046 to take the punch unit motor into, and out of, the home position. Observe the condition of the sensor on the UI. The display changes. Y↓N→Go to Flag 3. Check the wiring from the sensor to the PWB. Repair as necessary. Check the punch unit home sensor, Q11-044. Refer to: • GP 11 How to Check a Sensor. • P/J501, HVF Control PWB • 311A-171 HVF Power Distribution RAP. Install new components as necessary: • HVF hole punch assembly, PL 11.153 Item 1 • HVF control PWB, PL 11.157 Item 2. Perform SCP 5 Final Actions.