Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 311-062-00-150 — Xerox WorkCentre 5845

Code: 311-062-00-150

Description: LVF BM Crease Roll Failure RAP 311-062-00-150 The crease roll motor failed to run.
Remedy: Check the following parts for damage: • Upper crease roll, PL 11.84 Item 2. • Lower crease roll, PL 11.84 Item 3. • Crease roll gearbox assembly, PL 11.86 Item 8. • Crease roll gear 1, PL 11.84 Item 1. • Crease roll gear 2, PL 11.84 Item 3. • Crease roll gear 3, PL 11.84 Item 3. • Crease roll gear 4, PL 11.84 Item 4. The parts are good, Y↓N→Install new parts as necessary. Enter dC330 code 011-419. Actuate the crease roll motor encoder sensor, by slowly rotating the crease roll handle. The display changes. Y↓N→Go to Flag 1, check the crease roll motor encoder sensor, Q11-419. Refer to: • GP 11, How to Check a Sensor. • P/J112, LVF BM PWB. • 311D-150 LVF BM Power Distribution RAP. Install new components as necessary: • LVF BM PWB, PL 11.90 Item 1. • Crease roll motor encoder sensor, PL 11.86 Item 7. Enter dC330 code 011-062 to run the crease roll motor, MOT11-062. The motor runs. Y↓N→Go to Flag 2, check the crease roll motor, MOT11-062. Refer to: • GP 10, How to Check a Motor. • P/J103, LVF BM PWB. • 311D-150 LVF BM Power Distribution RAP. Install new components as necessary: • LVF BM PWB, PL 11.90 Item 1. • Crease roll motor, PL 11.86 Item 5. The fault may be intermittent, check for damaged wiring or connectors. If necessary repair the wiring or install new components.

← Xem tất cả mã lỗi Xerox WorkCentre 5845

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie