Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 311-191-00-171, 311-193-00-171, 311-194-00-171, 311-196-00-171 — Xerox WorkCentre 5845

Code: 311-191-00-171, 311-193-00-171, 311-194-00-171, 311-196-00-171

Description: Inserter Paper Jam RAP 311-191-00-171 The leading edge is late arriving at the inserter standby sensor. 311-193-00-171 The trailing edge is late leaving the inserter standby sensor. 311-194-00-171 The leading edge is late arriving at the inserter TE sensor. 311-196-00-171 The trailing edge is late leaving the inserter TE sensor. Fault code 311-191-00 may also be generated where a fault in the inserter causes jamming in the IOT.
Remedy: Enter dC330 code 011-155. Manually actuate the inserter TE sensor, Q11-155. The display changes. Y↓N→Go to Flag 1 and Flag 2. Check Q11-155. Refer to: • GP 11, How to Check a Sensor. • P/J6, P/J4, Inserter PWB. • P/J701, HVF Control PWB • 311A-171 HVF Power Distribution RAP. Install new components as necessary: • Inserter TE sensor, PL 11.179 Item 11. • Inserter PWB, PL 11.179 Item 9. • HVF control PWB, PL 11.157 Item 2. Measure the voltage of pin 2 of P/J11. Manually actuate the acceleration sensor. The voltage changes. Y↓N→Go to Flag 3 and Flag 4. Check the sensor. Refer to: • GP 11, How to Check a Sensor. • P/J6, P/J4, Inserter PWB. • P/J701, HVF Control PWB Install new components as necessary: • Acceleration sensor, PL 11.175 Item 10. • Inserter PWB, PL 11.179 Item 9. • HVF control PWB, PL 11.157 Item 2. Measure the voltage at pin 2 of P/J702 on the HVF PWB. Open the front door and open 8a jam clearance guide. Manually actuate the inserter standby sensor with a sheet of paper. The voltage changes. Y↓N→Go to Flag 5. Check the sensor. Refer to: • GP 11, How to Check a Sensor. • P/J702, HVF Control PWB • 311A-171 HVF Power Distribution RAP. Install new components as necessary: • Inserter standby sensor, PL 11.156 Item 2. • HVF control PWB, PL 11.157 Item 2. Enter dC330 code 011-077, to energize the inserter clutch, CL11-077. CL11-077 energizes. Y↓N→Go to Flag 6 (W/O TAG V-001) or Flag 10 (W/TAG V-001) and Flag 7. Check CL11-077. Refer to: • GP 12, How to Check a Solenoid or Clutch. • P/J13, P/J5, Inserter PWB. • P/J703, HVF Control PWB • 311A-171 HVF Power Distribution RAP. Install new components as necessary: • Inserter clutch, PL 11.179 Item 3. • Inserter control PWB, PL 11.179 Item 9. • HVF control PWB, PL 11.157 Item 2. Enter dC330 code 011-078 to run the inserter motor, MOT11-078. MOT11-078 runs. Y↓N→Go to Flag 8 and Flag 9. Check MOT11-078. Refer to: • GP 10 How to Check a Motor. • P/J701, HVF Control PWB • P/J4, Inserter PWB. • 311A-171 HVF Power Distribution RAP. Install new components as necessary: • Inserter motor, PL 11.181 Item 1. • Inserter control PWB, PL 11.179 Item 9. • HVF control PWB, PL 11.157 Item 2. Perform SCP 5 Final Actions.

← Xem tất cả mã lỗi Xerox WorkCentre 5845

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie