Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 311-319-00-150 — Xerox WorkCentre 5845

Code: 311-319-00-150

Description: LVF BM Rear Tamper Move Failure RAP 311-319-00-150 The rear tamper away home sensor has failed. NOTE: The away home position is with the rear tamper approximately halfway along it’s travel.
Remedy: NOTE: All LVF BM interlocks must be made to supply +24V to the motors. Enter dC330, codes 11-004 and 11-006 alternately. The rear tamper moves between the home and inboard positions. Y↓N→Go to Flag 3. Check the rear tamper motor, MOT11-004. Refer to: • GP 10, How to Check a Motor. • P/J312, LVF PWB. • 311D-150 LVF BM Power Distribution RAP. Repair or install new components as necessary: • Tamper assembly, PL 11.64 Item 1. • LVF PWB, PL 11.90 Item 8. Enter dC330 code 011-311, actuate the rear tamper home sensor Q11-311. The display changes. Y↓N→Go to Flag 1 and check Q11-311. Refer to: • GP 11, How to Check a Sensor. • P/J312, LVF PWB. • 311D-150 LVF BM Power Distribution RAP. Repair or install new components as necessary: • Rear tamper home sensor, PL 11.64 Item 3. • LVF PWB, PL 11.90 Item 8. NOTE: The away position is used for short edge feed small paper. This saves unnecessary rear tamper travel. Enter dC330, code 011-319, actuate the rear tamper away sensor Q11-319. The display changes. Y↓N→Go to Flag 2 and check Q11-319. Refer to: • GP 11, How to Check a Sensor. • P/J312, LVF PWB. • 311D-150 LVF BM Power Distribution RAP. Repair or install new components as necessary: • Rear tamper away sensor, PL 11.64 Item 3. • LVF PWB, PL 11.90 Item 8. Perform SCP 5 Final Actions.

← Xem tất cả mã lỗi Xerox WorkCentre 5845

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie