Description: HVF Ejector Module RAP 311-450-00-171 The ejector module motor has stalled 311-456-00-171 The ejector module did not return to the home position. 311-457-00-171 The ejector module did not move from the home position. 311-458-00-171 The ejector module did not return to the out position. 311-459-00-171 The ejector module did not move from the out position.
Remedy: Enter dC330 code 011-320, ejector home sensor, Q11-320. Stack the dC330 code 011-053 to move the stapler unit inboard, and observe the display. This action moves the stapler unit inboard, and moves the ejector module to the out position. The display changes. Y↓N→The ejector module moved to the out position. Y↓N→Go to Flag 2. Check the wiring and repair as necessary. Check the ejector unit motor, MOT11-023. Refer to: • GP 10 How to Check a Motor. • P/J802, HVF Control PWB. • 311A-171 HVF Power Distribution RAP. Install new components as necessary: • Ejector assembly, PL 11.140 Item 2. • HVF control PWB, PL 11.157 Item 2. Go to Flag 1. Check the wiring and repair as necessary. Check Q11-320. Refer to: • GP 11 How to Check a Sensor. • P/J401, HVF Control PWB. • 311A-171 HVF Power Distribution RAP. Install new components as necessary: • Ejector assembly, PL 11.140 Item 2. • HVF control PWB, PL 11.157 Item 2. Exit, then re-enter service mode. This returns the ejector module to the home position. Enter dC330 code, 11-322, ejector unit out sensor, Q11-322. Stack the dC330 code, 11-053 to move the stapler unit inboard. The display changes. Y↓N→Go to Flag 3. Check the wiring and repair as necessary. Check Q11-322. Refer to: • GP 11 How to Check a Sensor. • P/J401, HVF Control PWB. • 311A-171 HVF Power Distribution RAP. Install new components as necessary: • Ejector assembly, PL 11.140 Item 2. • HVF control PWB, PL 11.157 Item 2. Exit, then re-enter service mode. This returns the ejector module to the home position. Enter the dC330 code 011-177, ejector motor encoder, Q11-177. Stack the dC330 code 011-053 to move the stapler unit inboard. The display changes condition for a few seconds. Y↓N→Go to Flag 4. Check the wiring and repair as necessary. Check Q11-177. Refer to: • GP 10 How to Check a Motor. • P/J401, HVF Control PWB. • 311A-171 HVF Power Distribution RAP. Install new components as necessary: • Ejector assembly, PL 11.140 Item 2. • HVF control PWB, PL 11.157 Item 2. Perform SCP 5 Final Actions.