Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 311C-171 — Xerox WorkCentre 5845

Code: 311C-171

Description: HVF BM Bin 2 Failure RAP Bin 2 fails to remove the finished booklets from the exit area of the booklet maker.
Remedy: Enter dC330 code 011-389. Actuate the BM bin 2 90% full sensor, Q11-389. The display changes. Y↓N→If a tri-folder is installed, go to Flag 4. Check the connection at PJ583 on the tri-folder. The connection are good. Y↓N→Check the connectors and harness at the tri-folder. Repair the harness as necessary. Go to Flag 1. Check Q11-389. Refer to: • GP 11, How to Check a Sensor. • P/J556, BM PWB. • 311A-171 HVF Power Distribution RAP. Install new components as necessary: • BM PWB, PL 11.166 Item 10. • BM bin 2 90% full sensor PL 11.169 Item 5. NOTE: The BM conveyor belts drive motor stops after 10 seconds. Enter dC330 code 011-402 to run the BM conveyor belts drive motor, MOT11-402. MOT11- 402 runs. Y↓N→If a tri-folder is installed, go to Flag 5. Check the connection at PJ583 on the tri-folder. The connection are good. Y↓N→Check the connectors and harness at the tri-folder. Repair the harness as necessary. Go to Flag 3 or Flag 2. Check MOT11-402. Refer to: • GP 10 How to Check a Motor. • P/J555, BM PWB. • 311A-171 HVF Power Distribution RAP. Install new components as necessary: • BM conveyor belts drive motor, PL 11.169 Item 4. • BM PWB, PL 11.166 Item 10. The fault may be intermittent, check for damaged wiring or bad connectors. If necessary install new conveyor belts, PL 11.169 Item 1.

← Xem tất cả mã lỗi Xerox WorkCentre 5845

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie