Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 373B — Xerox WorkCentre 5845

Code: 373B

Description: Tray 3 or Tray 4 Out of Paper RAP Use this RAP when an incorrect tray 3 or tray 4 out of paper message is displayed.
Remedy: Refer. Enter the relevant code to monitor the tray empty sensor: • Tray 3 empty sensor, Q73-320. Enter dC330 code 073-320. Press Start. • Tray 4 empty sensor, Q74-320. Enter dC330 code 074-320. Press Start. Actuate the tray empty sensor with a piece of paper. The display changes. Y↓N→For tray 3, go to Flag 1. Check Q73-320. For tray 4, go to Flag 2. Check Q74-320. Refer to: • GP 11 How to Check a Sensor. • Tray 3 P/J1, HCF control PWB. • Tray 4 P/J3, HCF control PWB. • 301E +5V Distribution RAP. • 301B 0V Distribution RAP. Install new components as necessary: • Tray 3 empty sensor, PL 80.32 Item 6. • Tray 4 empty sensor, PL 80.33 Item 3. • HCF Control PWB, PL 70.21 Item 2. Remove the relevant tray front cover, refer to Tray 3 and Tray 4 Removal. Close the relevant tray. The feed roll assembly drops when the tray is closed. Y↓N→Remove the relevant paper feed assembly Tray 3 Paper Feed Assembly orray 4 Paper Feed Assembly. Ensure the lever is undamaged and operates correctly. If necessary, install a new paper feed assembly, PL 80.32 Item 1 (Tray 3) or PL 80.33 Item 1 (Tray 4). The fault may be intermittent, check the wiring and connectors between the HCF control PWB and the sensor, refer to GP 7.

← Xem tất cả mã lỗi Xerox WorkCentre 5845

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie