Description: Bypass Tray Registration Jam RAP (65-90 ppm)
Remedy: NOTE: The front door interlock must be cheated when checking +24V components. Enter dC330 code 082-150 registration sensor, Q82-150. Press Start.. Activate Q82- 150. The display changes. Y↓N→Go to Flag 1. Check Q82-150. Refer to: • GP 11 How to Check a Sensor. • P/J16, IOT PWB. • 301E +5V Distribution RAP. • 301B 0V Distribution RAP. If necessary install a new registration sensor, (65-90 ppm) PL 80.17 Item 3. If the problem persists, perform OF7 IOT PWB Diagnostics RAP. Enter dC330 code 042-010 main motor, MOT42-010. Add code 082-070 registration clutch, CL82-070. Press Start. The jam clearance knob, 4c, PL 80.17 Item 10, rotates. Y↓N→Go to Flag 3. Check CL82-070. Refer to: • GP 12 How to Check a Solenoid or Clutch. • P/J5, IOT PWB. • P/J17 LVPS. • Fuse, PL 1.10 Item 9, GP 7. If necessary install a new registration clutch, (65-90 ppm) PL 80.17 Item 7. If the problem persists, perform OF7 IOT PWB Diagnostics RAP. Enter dC330 code 081-050 bypass feed solenoid, SOL81-050. Press Start. The solenoid energizes. Y↓N→Go to Flag 2. Check SOL81-050. Refer to: • GP 12 How to Check a Solenoid or Clutch. •. • P/J10, IOT PWB. • 301G +24V Distribution RAP. • 301B 0V Distribution RAP. If necessary install a new feed solenoid, PL 70.30 Item 4. If the problem persists, perform OF7 IOT PWB Diagnostics RAP. Perform the following: • Check the registration transport rolls and registration nip rolls, PL 80.17 Item 1. • If the fault still occurs, check the drives plate on the registration clutch for damage and contamination. Refer to the replacement procedure. • Check the idler roll and upper guide on the feed head. • Clean the feed roll and retard pad using a cloth dampened with water. • If necessary install a new feed and retard pad, PL 70.30 Item 21.