Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 305-335-00, 305-336-00 — Xerox WorkCentre 5855

Code: 305-335-00, 305-336-00

Description: SPDH Takeaway Sensor Paper Jam RAP 305-335-00 The SPDH takeaway sensor does not detect the lead edge of the document within the correct time. 305-336-00 The SPDH takeaway sensor detects a paper jam.
Remedy: Enter dC330 code 005-335, SPDH takeaway sensor, Q05-335. Activate Q05-335 by opening and closing the SPDH top cover. The display changes. Y↓N→Go to Flag 1. Check Q05-335. Refer to: • GP 36 How to Check an Adaptive Sensor • P/J465, SPDH PWB • 301D +3.3V Distribution RAP Install new components as necessary: • SPDH takeaway sensor, PL 5.20 Item 10 • SPDH PWB, PL 5.10 Item 5 Open the SPDH top cover. Hold the top cover interlock switch closed using the shank of a standard interlock cheater. Enter dC330 code 005-020 to run the SPDH feed motor, MOT05-020. MOT05-020 runs. Y↓N→Go to Flag 2. Check MOT05-020. Refer to: • GP 10 How to Check a Motor • P/J468, SPDH PWB • 301G +24V Distribution RAP • 301B 0V Distribution RAP Install new components as necessary: • SPDH feed motor, PL 5.18 Item 2 • SPDH PWB, PL 5.10 Item 5 Hold the top cover interlock switch closed. Enter dC330 code 005-020 to run the SPDH feed motor, MOT05-020. Stack the code 05-025 to energize the feed clutch, CL05-025. The retard roll rotates. Y↓N→Go to Flag 3. Check CL05-025. Refer to: • GP 12 How to Check a Solenoid or Clutch • P/J471, SPDH PWB • 301G +24V Distribution RAP • 301B 0V Distribution RAP Refer to GP 7 and check the items that follow: • Feed motor belt, PL 5.19 Item 19, perform ADJ 5.1. SPDH Drive Belts Adjustment if necessary • Takeaway roll, PL 5.17 Item 1 • Takeaway roll gear, PL 5.17 Item 8 • Takeaway roll idlers (part of PL 5.20 Item 15) • Feed clutch drive gear/pulley, PL 5.19 Item 4 Install new components as necessary: • Feed clutch, CL05-025, PL 5.18 Item 4 • SPDH PWB, PL 5.10 Item 5 • Takeaway roll, PL 5.17 Item 1 • Takeaway roll gear, PL 5.17 Item 8 • Top cover assembly, PL 5.20 Item 15 Close the top cover. Enter dC330 code 005-020 to run the SPDH feed motor, MOT05-020. Stack the code 05-025 to energize the feed clutch, CL05-025. The nudger roll drops towards the input tray. Y↓N→Check the nudger roll housing will both latch in the up position and drop to the lowered position without binding. Check around the housing for paper debris or misplaced components that could prevent correct operation. Check the following components: • Feed assembly drive belt, PL 5.19 Item 18 • Nudger roll housing, PL 5.20 Item 8 • Shaft, PL 5.20 Item 5 • Shaft, PL 5.20 Item 12 Install new parts as necessary: • Feed assembly drive belt, part of the SPDH drive kit, PL 5.19 Item 23 • Top cover assembly, PL 5.20 Item 15 Perform the steps that follow: • Check the takeaway roll static eliminator • Make sure that the SPDH is connected to ground correctly, refer to the 301A Ground Distribution RAP • Check the condition and operation of the items that follow, if necessary clean the items or install new parts: – Feed roll, PL 5.20 Item 6 – Nudger roll, PL 5.20 Item 7 – Retard roll, PL 5.25 Item 3 This fault can also be caused by malfunction of the last sheet out sensor, perform the 305B Last Sheet Out Sensor Failure RAP.

← Xem tất cả mã lỗi Xerox WorkCentre 5855

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie