Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 305-342-00, 305-343-00 — Xerox WorkCentre 5855

Code: 305-342-00, 305-343-00

Description: SPDH Side 2 Reg Sensor Failure RAP 305-342-00 The SPDH side 2 reg sensor does not detect the lead edge of the document within the correct time. 305-343-00 The SPDH side 2 reg sensor detects a paper jam.
Remedy: Enter dC330 code 005-343, SPDH side 2 reg sensor, Q05-343. Open the SPDH. Open and close the jam clearance baffle to actuate the sensor. The display changes. Y↓N→Go to Flag 1. Check Q05-343. Refer to: • GP 36 How to Check an Adaptive Sensor. • P/J466, SPDH PWB. • 301D +3.3V Distribution RAP. Install new components as necessary: • SPDH side 2 reg sensor, PL 60.30 Item 8. • SPDH PWB, PL 5.10 Item 5. Open the SPDH top cover. Hold the top cover interlock switch closed using the shank of a standard interlock cheater. Enter dC330 code 005-030 to run the SPDH read motor, MOT05-030. MOT05-030 runs. Y↓N→Go to Flag 2. Check MOT05-030. Refer to: • GP 10 How to Check a Motor. • P/J468, SPDH PWB. • 301G +24V Distribution RAP. • 301B 0V Distribution RAP. Install new components as necessary: • SPDH read motor, PL 5.18 Item 1. • SPDH PWB, PL 5.10 Item 5. Perform the steps that follow: • Refer to GP 7 and check the following items: – Read motor belt, PL 5.19 Item 18, perform ADJ 5.1 SPDH Drive Belts Adjustment if necessary. – Mid scan drive belt, PL 5.19 Item 21, perform ADJ 5.1 SPDH Drive Belts Adjustment if necessary. – Mid scan roll assembly, PL 5.17 Item 4. – Mid scan roll drive pulley, PL 5.19 Item 13. • Make sure that the SPDH is connected to ground correctly, refer to the 301A Ground Distribution RAP.

← Xem tất cả mã lỗi Xerox WorkCentre 5855

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie