Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 311-320-00-150, 311-322-00-150 — Xerox WorkCentre 5855

Code: 311-320-00-150, 311-322-00-150

Description: Ejector Movement Failure RAP 311-320-00-150 The ejector is not at the home position. 311-322-00-150 The ejector fails to perform a cycle of operation. NOTE: A cycle of operation for the ejector is to cycle from the home position to the out position and back to the home position.
Remedy: NOTE: All LVF BM interlocks must be made to supply +24V to the motors. Enter dC330, code 011-322 actuate the ejector out sensor, Q11-322. The display changes. Y↓N→Go to Flag 2. Check Q11-322. Refer to: • GP 11 How to Check a Sensor. •. • P/J304, LVF PWB. • 311D-150 LVF BM Power Distribution RAP. Repair or install new components as necessary: • Ejector out sensor, PL 11.66 Item 3. • LVF PWB, PL 11.90 Item 8 Enter dC330, code 011-320, actuate the ejector home sensor, Q11-320. The display changes. Y↓N→Go to Flag 1. Check Q11-320. Refer to: • GP 11 How to Check a Sensor. •. • P/J304, LVF PWB. • 311D-150 LVF BM Power Distribution RAP. Repair or install new components as necessary: • Ejector home sensor, PL 11.66 Item 3. • LVF PWB, PL 11.90 Item 8. Enter dC330, code 011-023 ejector cycle, check the operation of the ejector motor MOT11- 020. The ejector motor runs. Y↓N→Go to Flag 3. Check the ejector motor, MOT11-020. Refer to: • GP 10, How to Check a Motor. •. • P/J303, LVF PWB. • 311D-150 LVF BM Power Distribution RAP. Repair or Install new components as necessary: • Ejector assembly, PL 11.66 Item 1. • LVF PWB, PL 11.90 Item 8. Enter dC330, code 011-023 ejector cycle, check the ejector cycles. Stack the code 011-320 ejector sensor home, then cycle the ejector. Stack the code 011-322 ejector sensor out, then cycle the ejector. The ejector actuates the ejector home sensor and the ejector out sensor. Y↓N→Refer to GP 7, check the following components, install new components as necessary; • Pulley drive gear, PL 11.66 Item 8. • Ejector belt, PL 11.66 Item 5. The ejector cycles noisily, colliding with the end stops. Y↓N→Check the stapler to ensure the staples are correctly formed. Mis-formed staples can cause the set to hang in the stapler causing ejector movement failures. The staples are correctly formed. Y↓N→Clear the staple head of any mis-formed staples, then check the operation of the stapler. If necessary, install a new staple head unit, PL 11.68 Item 5. If the ejector is still not moving, install a new ejector assembly, PL 11.66 Item 1. Perform SCP 5 Final Actions. Enter dC330, code 011-177, actuate the ejector motor encoder sensor, Q11-177. The display changes. Y↓N→Go to Flag 4. Check Q11-177. Refer to: • GP 11 How to Check a Sensor. •. • P/J304, LVF PWB. • 311D-150 LVF BM Power Distribution RAP. Repair or install new components as necessary: • Ejector motor encoder sensor, Q11-096, PL 11.66 Item 3. • LVF PWB, PL 11.90 Item 8.

← Xem tất cả mã lỗi Xerox WorkCentre 5855

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie