Description: Staple Head Unit Movement Failure RAP 311-371-00-110 The staple head unit fails to move. NOTE: The home position is when the staple head unit is at the corner stapling position (fully to the front of the 2K LCSS and rotated through 45 degrees).
Remedy: NOTE: All 2K LCSS interlocks must be made to supply +24V to the motors. Enter dC330 code 011-021 to move the ejector assembly fully to the right. Enter code 011-055 to cycle the SU1 motor, MOT11-053. The stapling unit cycles back and forth along the track. Y↓N→Go to Flag 3. Check MOT11-053. Refer to: • 311G-110 2K LCSS PWB Damage RAP. • GP 10, How to Check a Motor. •. • P/J308, 2K LCSS PWB. • 311D-110. 2K LCSS Power Distribution RAP. Install new components as necessary: • Stapler traverse assembly, PL 11.20 Item 1. • 2K LCSS PWB, PL 11.26 Item 1. Enter dC330 code 011-370-00. Actuate the SU1 home sensor, Q11-370, by moving the stapler unit to and from the home position using the green thumb-wheel. The display changes. Y↓N→Go to Flag 1. Check Q11-370. Refer to: • 311G-110 2K LCSS PWB Damage RAP. • GP 11. How to check a sensor. •. • P/J308, 2K LCSS PWB. • 311D-110 2K LCSS Power Distribution RAP. Install new components as necessary: • SU1 home sensor, PL 11.20 Item 3. • 2K LCSS PWB, PL 11.26 Item 1. Enter dC330 code 011-021 to move the ejector assembly fully to the right. Enter code 011-371. Actuate the SU1 front index sensor, Q11-371, by moving the stapler unit to and from the flag position (approximately 115mm (4.5 inches) from the front of the track) using the green thumbwheel. The display changes. Y↓N→Go to Flag 2. Check Q11-371. Refer to: • 311G-110 2K LCSS PWB Damage RAP. • GP 11 How to Check a Sensor. • P/J308, 2K LCSS PWB. • 311D-110 2K LCSS Power Distribution RAP. Install new components as necessary: • SU1 front index sensor, PL 11.20 Item 3. • 2K LCSS PWB, PL 11.26 Item 1. Perform SCP 5 Final Actions.