Description: Inserter Paper Sensing and +5V Supply RAP Use this RAP to find the cause of inserter empty, inserter paper width and +5v supply problems.
Remedy: If a +5V supply problem is suspected, perform the following: Go to 311A-171 and check the 0V and +5V supply from the HVF control PWB to the inserter control PWB. Repair the wiring as necessary, or refer to 311A-171 HVF Power Distribution RAP. Install new components as necessary: • Inserter PWB, PL 11.179 Item 9. • HVF control PWB, PL 11.157 Item 2. To diagnose inserter paper sensing and paper width problems, perform the following: Enter the dC330 code 011-153, inserter unit empty sensor, Q11-153. Use a sheet of paper to actuate Q11-153. The sensor display changes. Y↓N→Go to Flag 1 and Flag 2. Check Q11-153. Refer to: • GP 11 How to Check a Sensor. • P/J8 and P/J4, Inserter PWB. • 311A-171 HVF Power Distribution RAP Install new component as necessary: • Unit empty sensor, PL 11.175 Item 11. • Inserter PWB, PL 11.179 Item 9. • HVF control PWB, PL 11.157 Item 2. Go to Flag 3 and Flag 4. Measure the voltage from the inserter paper width sensor 1, Q11-152, while sliding paper width guide. The voltage changes. Y↓N→Check Q11-152. Refer to: • GP 11 How to Check a Sensor. • P/J8 and P/J4, Inserter PWB. • 311A-171 HVF Power Distribution RAP. Install new components as necessary: • Inserter paper width sensor 1, PL 11.175 Item 13. • Inserter PWB, PL 11.179 Item 9. • HVF control PWB, PL 11.157 Item 2. Go to Flag 5 and Flag 6. Measure the voltage from the inserter paper width sensor 2, Q11-152 while sliding paper width guide. The voltage changes. Y↓N→Check Q11-152. Refer to: • GP 11 How to Check a Sensor. • P/J8 and P/J4, Inserter PWB. • 311A-171 HVF Power Distribution RAP. Install new components as necessary: • Inserter paper width sensor 2, PL 11.175 Item 13. • Inserter PWB, PL 11.179 Item 9. • HVF control PWB, PL 11.157 Item 2. Go to Flag 7 and Flag 8. Measure the voltage from the acceleration sensor, while actuating the sensor with paper. The voltage changes. Y↓N→Check the acceleration sensor. Refer To: • GP 11 How to check a Sensor. • P/J11 and P/J4, Inserter PWB. • 311A-171 HVF Power Distribution RAP. Install new components as necessary: • Acceleration sensor, PL 11.175 Item 10. • Inserter PWB, PL 11.179 Item 9. • HVF control PWB, PL 11.157 Item 2. Got to Flag 9 and Flag 10. Measure the voltage from the IDG pickup sensor while actuating the sensor with paper. The voltage changes. Y↓N→Check the IDG Pickup sensor. Refer to: • GP 11 How to check a Sensor. • P/J7 and P/J4, Inserter PWB. • 311A-171 HVF Power Distribution RAP. Install new components as necessary: • IDG pickup sensor, PL 11.179 Item 10. • Inserter PWB, PL 11.179 Item 9. • HVF control PWB, PL 11.157 Item 2. Perform SCP 5 Final Actions.