Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 311G-171 — Xerox WorkCentre 5865

Code: 311G-171

Description: HVF BM Poor Stacking RAP Use this RAP to find the cause of poor stacking in the HVF BM.
Remedy: Check the following; • Look for sets that are not dropping back fully in the bin 1 tray and therefore not being detected by the kicker fingers and sensors: – Large paper sizes should not be stacked on top of small paper sizes. – Ensure that the paper stack in each paper tray has been fanned. – Turn over the paper stack in each paper tray. – Ensure that all paper or other copy stock being used is within the size and weight specifications. Refer to GP 20 Paper and Media Size Specifications. – Try using a fresh ream of paper. – Ensure that the edge guides of all paper trays are adjusted correctly for the paper size and that the trays are fully closed. • Labels must not be fed to bin1, but to bin 0 only. • It is recommended that transparencies are fed to bin 0 whenever possible. • Check that the bin 1 upper limit switch, S11-334 and the bin 1 lower limit switch, S11-335 are working correctly. Refer to the 311-460-00-171 to 311-462-00-171 Bin 1 Position RAP. • Make sure that the compiler carriage tampers move to the correct paper size. • Check that the HVF BM is not positioned near an air conditioning or ventilation output duct. Air flow across the output bins can cause poor stacking. • Check the output copies for curl, refer to IQ5.

← Xem tất cả mã lỗi Xerox WorkCentre 5865

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie