Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 311H-150 — Xerox WorkCentre 5865

Code: 311H-150

Description: LVF BM Copy Damage in the LVF BM RAP Use this RAP to identify and correct the causes of copy damage in the LVF BM.
Remedy: Check the following: • Look for torn paper in the LVF BM paper path. Torn fragments can pass through the IOT and LVF BM paper path without causing a problem until they finally wedge themselves at some point. A likely place for a piece of paper to be wedged is at the hole punch assembly, where the top and bottom guides form the narrowest part of the paper path. • Ensure that the bin 0 / bin 1 diverter assembly, PL 11.70 Item 13, operates correctly and has full movement. • Ensure that the hole punches park at the fully open position. If they protrude even slightly, a jam will occur in the narrow paper path of the hole punch. • Ensure that the paper entry guide assembly, PL 11.62 Item 7, closes and latches correctly. Check that the magnet at the rear is located and functions correctly. Check the clip at the front is positioned correctly. • Ensure that all idler rolls in the LVF BM paper path are free to rotate, particularly those on the jam clearance guide, where the paper turns through 90 degrees. • Ensure that the paper path ribs of the paper entry guide assembly, PL 11.62 Item 7, and the entry guide cover assembly, PL 11.50 Item 3, are free of “scores” and “nicks”. Check also for contamination and glue from label stock.

← Xem tất cả mã lỗi Xerox WorkCentre 5865

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie