Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 361-340-00 — Xerox WorkCentre 5865

Code: 361-340-00

Description: ROS Laser Failure RAP 361-340-00 The IOT PWB has not detected the ROS laser reaching the operating speed.
Remedy: Go to Flag 3. Connect a service meter to P/J2 pin 7 and make a set of 5 copies. 0V is measured at P/J2 pin 7 on the IOT PWB during run. Y↓N→The xerographic module is fully home and the front door is fully closed or the front door interlock is cheated. Y↓N→Correct the condition. Go to Flag 1. Disconnect P/J18 from the LVPS. Check the following voltages on the LVPS: • +24V between pins 1 and 2. • +3.3V between pins 3 and 4. The voltages are good. Y↓N→Go to the relevant RAP: • 301B 0V Distribution RAP, refer to the 3.3V return and 24V return. • 301D +3.3V Distribution RAP. • 301G +24V Distribution RAP. Enter the dC330 output code 061-020 and listen for the ROS motor. Go to Flag 2.. The ROS motor gives a distinctive ascending frequency sound, of a short duration (5 to 6 seconds) during transition from standby to run. Y↓N→Go to the 361-020-00 ROS Motor Failure RAP. NOTE: . To disconnect P/J1 and P/J2 the ROS must be removed from the machine. The ROS PWB may not be marked with the correct PJ numbers, where P/J1 and P/J2 are connected. P/J1 can be identified as a four way power harness. P/J2 can be identified as a seven way signal harness. Check the wiring at Flag 1, Flag 2 and Flag 3. . The wiring is good. Y↓N→Repair the wiring or install a new harness, PL 60.10 Item 5. Install a new ROS, PL 60.10 Item 4. Go to Flag 4. Check that P/J112 on the SBC PWB is securely connected. If the fault is still present, remove the ROS. If the fault is still present, go to Flag 4. Check the continuity of the ROS data cable ( P/J112 to P/J7).. The ROS data cable is good. Y↓N→Install a new ROS power distribution/communications harness, PL 60.10 Item 5. Install a new ROS, PL 60.10 Item 4. If the fault remains, perform the following as necessary: • 303D SBC PWB Diagnostics RAP. • OF7 IOT PWB Diagnostics RAP.

← Xem tất cả mã lỗi Xerox WorkCentre 5865

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie