Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 311-050-00-120, 311-360-00-120 — Xerox WorkCentre 5875

Code: 311-050-00-120, 311-360-00-120

Description: Staple Head Operation Failure RAP 311-050-00-120 The staple head fails to cycle. 311-360-00-120 The staple head is not at the home position. NOTE: The home position is with the jaws of the staple head fully open.
Remedy: NOTE: After repairing the fault using this RAP, switch off the machine, then switch on the machine, GP 14, to enable operation of the staple head. NOTE: All 1K LCSS interlocks must be made to supply +24V to the motors. Place two sheets of paper in the stapler jaws. Enter dC330 code 011-050, staple head motor 1, to cycle the staple head once. The staple head operates as expected. Y↓N→Go to Flag 1 and Flag 2. Check the wiring and connectors between the 1K LCSS PWB and the staple head. The wiring is good. Y↓N→Repair the wiring. Perform the following procedures: • 311C-120 1K LCSS Power Distribution RAP. • 311F-120 1K LCSS PWB Damage RAP. Install new components as necessary: • Staple head unit, PL 11.116 Item 5. • 1K LCSS PWB, PL 11.124 Item 1. Perform SCP 5 Final Actions.

← Xem tất cả mã lỗi Xerox WorkCentre 5875

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie