Description: LVF BM Staple Head Unit Movement Failure RAP 311-053-00-150 The staple head unit fails to move. 311-370-00-150 The staple head unit is not at the home position. 311-371-00-150 The staple head does not move away from the home position. NOTE: The home position is when the staple head unit is at the corner stapling position (fully to the front of the LVF BM and rotated through 45 degrees).
Remedy: NOTE: All LVF BM interlocks must be made to supply +24V to the motors. Enter dC330, code 011-021 to move the ejector assembly fully to the right. Enter code 011- 055. The stapling unit cycles back and forth along the track. Y↓N→Go to Flag 3. Check MOT11-053. Refer to: • GP 10, How to Check a Motor. •. • P/J308, LVF PWB. • 311D-150 LVF BM Power Distribution RAP. Repair or install new components as necessary: • Stapler traverse assembly, PL 11.68 Item 1. • LVF PWB, PL 11.90 Item 8. Enter dC330, code 011-370. Actuate the SU1 home sensor, Q11-370, by moving the stapler unit to and from the home position using the green thumb-wheel. The display changes. Y↓N→Go to Flag 1. Check Q11-370. Refer to: • GP 11. How to check a sensor. •. • P/J308, LVF PWB. • 311D-150 LVF BM Power Distribution RAP. Repair or install new components as necessary: • SU1 home sensor, PL 11.68 Item 3. • LVF PWB, PL 11.90 Item 8. Enter dC330, code 011-021 to move the ejector assembly fully to the right. Enter code 011- 371. Actuate the SU1 front index sensor, Q11-371, by moving the stapler unit to and from the flag position (approximately 115mm (4.5 inches) from the front of the track using the green thumb-wheel. The display changes. Y↓N→Go to Flag 2. Check Q11-371. Refer to: • GP 11 How to Check a Sensor. • P/J308, LVF PWB. • 311D-150 LVF BM Power Distribution RAP. Repair or install new components as necessary: • SU1 front index sensor, PL 11.68 Item 3. • LVF PWB, PL 11.90 Item 8. Perform SCP 5 Final Actions.