Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 03130031-2F24 — Canon iPF5100

Code: 03130031-2F24

Description: Cutter drive time-out error. After the cutter motor was driven of the cutter unit, cutter right detection sensor or cutter HP sensor ON was not able to be detected in the regulation time.
Causes: Cutter right position sensor, cutter HP sensor, cutter motor, cutter unit, cutter driver PCB, or main controller PCB
Remedy: 1. Visual check Remove foreign substances from the cutter unit if any. 2. Cutter right position sensor and cutter HP sensor Select [SERVICE MODE]>[I/O DISPLAY] to check for normal operation. If the operation is abnormal, replace the feed roller HP sensor. 3. Cable continuity check If continuity of the cable between the cutter right position sensor, the cutter HP sensor, the cutter motor and the cutter driver PCB is abnormal, replace the cable. 4. Replace the cutter motor. 5. Replace the cutter unit. 6. Replace the cutter driver PCB. 7. Cable continuity check If continuity of the cable between the cutter driver PCB and the main controller PCB is abnormal, replace the cable. 8. Replace the main controller PCB.

← Xem tất cả mã lỗi Canon iPF5100

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie