Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 341-395-00, 341-396-00, 341-852-00 — Xerox WorkCentre 5875

Code: 341-395-00, 341-396-00, 341-852-00

Description: IOT PWB Fault RAP 341-395-00 The IOT has cycled without printing. 341-396-00 The photoreceptor is detected not turning while the laser is on. 341-852-00 IOT has detected that it is out of timers.
Remedy: 1. Ensure all the P/Js on the IOT PWB, PL 1.10 Item 2 are correctly and securely connected. 2. 341-395-00 Only: This fault can be caused by a poor ground on the duplex tray or a paper path problem. Check the active fault list for an 8X-XXX or 9X-XXX fault. Go to the indicated RAP. This fault can also be caused by a paper guide in a paper tray being set to the wrong paper size. Check the paper guide settings in the paper trays. 3. Reload the software set, GP 4, Machine Software. NOTE: The supply harness is a flying lead that is a part of the LVPS and is not spared separately. 4. Go to Flag 1. Check the voltages. As necessary, refer to: • 301G +24V Distribution RAP. • 301F +12V Distribution RAP. • 301E +5V Distribution RAP. • 301D +3.3V Distribution RAP. • 301B 0V Distribution RAP. 5. 341-396-00 Only: If necessary, go to the 340A Main Drive Motor and Photoreceptor Motor RAP. Perform the photoreceptor motor checkout. 6. Perform the 301L LVPS Checkout RAP. 7. Perform the OF7 IOT PWB Diagnostics RAP.

← Xem tất cả mã lỗi Xerox WorkCentre 5875

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie