Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 381-108-00 — Xerox WorkCentre 5875

Code: 381-108-00

Description: Tray 3 or Tray 4 Paper Feed Jam RAP 381-108-00 The lead edge of the paper was late to tray 2 feed sensor when feeding from tray 3 or tray 4.
Remedy: NOTE: The front door interlock must be cheated when checking +24V components. Enter dC330 code 081-102 tray 2 feed sensor, Q81-102. Press Start. Manually actuate the sensor. The display changes. Y↓N→Go to Flag 1. Check Q81-102. Refer to: • GP 11 How to Check a Sensor. • P/J276, Tray 1 and 2 control PWB • 301E +5V Distribution RAP. • 301B 0V Distribution RAP. Install new components as necessary: • Tray 2 feed sensor, PL 70.30 Item 24. • Tray 1 and 2 control PWB, PL 70.10 Item 2. Enter dC330 code 081-045 HCF transport motor, MOT81-045. Press Start. The motor runs. Y↓N→Go to Flag 2. Check MOT81-045. Refer to: • GP 10 How to Check a Motor. • P/J6, HCF control PWB • 301G +24V Distribution RAP. • 301E 0V Distribution RAP. Install new components as necessary: • HCF transport motor, PL 80.36 Item 13. • HCF control PWB, PL 70.21 Item 2. The transport rolls rotate. Y↓N→Refer to. Check the following: • Drive belt, PL 80.36 Item 6. • Drive coupling, PL 80.36 Item 7. • Idler roll assembly, PL 80.36 Item 8. • Tray 3 and 4 transport roll, PL 80.32 Item 4 Perform the following: • If the fault occurs when feeding from tray 3, go to 381-107-00, 381-132-00 Tray 3 Paper Feed Jam RAP. • If the fault occurs when feeding from tray 4, go to 381-133-00 Tray 4 Paper Feed Jam RAP.

← Xem tất cả mã lỗi Xerox WorkCentre 5875

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie