Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 390B — Xerox WorkCentre 5875

Code: 390B

Description: Waste Toner Full Sensor RAP Use this RAP if the message ‘waste toner bottle nearly full’ appears, when the waste toner bottle is empty. The waste toner bottle has the capacity to hold the waste toner from over 100K prints at 6% average area coverage. The waste toner sensor is an infrared transmission sensor. The sensor consists of an infrared emitter on one side of the bottle and an infrared detector on the other side of the bottle.
Remedy: Use thick black card to manually actuate the sensor. Enter dC330 code 093-350 waste toner full sensor, Q93-350. Pass the black card between the sensor transmitter and receiver. The display changes. Y↓N→Go to Flag 1. Check Q93-350. Refer to: • GP 11 How to Check a Sensor. •. • P/J7, IOT PWB. • 301E +5V Distribution RAP. • 301B 0V Distribution RAP. If necessary, install a new waste toner full sensor, PL 90.20 Item 2. If the fault remains, perform the OF7 IOT PWB Diagnostics RAP. The fault may be intermittent. Check that the sensor is located correctly on the support bracket and on the machine frame. Check for damaged components on the sensor, PL 90.10 Item 2.

← Xem tất cả mã lỗi Xerox WorkCentre 5875

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie