Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 311-050-00-150, 311-360-00-150 — Xerox WorkCentre 5890

Code: 311-050-00-150, 311-360-00-150

Description: LVF BM Staple Head Operation Failure RAP 311-050-00-150 The staple head fails to cycle. 311-360-00-150 The staple head is not at the home position. NOTE: The home position is with the jaws of the staple head fully open.
Remedy: NOTE: After repairing the fault using this RAP, switch off the machine, then switch on the machine, GP 14, to enable operation of the staple head. NOTE: All LVF BM interlocks must be made to supply +24V to the motors. Place two sheets of paper in the stapler jaws. Enter dC330, code 011-050 to cycle the staple head once, and 011-051 to reverse the staple head to the home position. The staple head operates as expected. Y↓N→Go to Flag 1 and Flag 2. Check the wiring and connectors between the LVF PWB and the staple head. The wiring is good. Y↓N→Repair the wiring. Install new components as necessary: • Staple head unit, PL 11.68 Item 5. • LVF PWB, PL 11.90 Item 8. Perform SCP 5 Final Actions.

← Xem tất cả mã lỗi Xerox WorkCentre 5890

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie