Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 311-164-00-171, 311-165-00-171 — Xerox WorkCentre 5890

Code: 311-164-00-171, 311-165-00-171

Description: HVF Buffer Path RAP 311-164-00-171 The paper trailing edge is late leaving the buffer path sensor. 311-165-00-171 The paper leading edge is late arriving at the buffer path sensor.
Remedy: Enter dC330 code 011-164. Manually activate the buffer path sensor, Q11-164. The display changes. Y↓N→Go to Flag 1. Check Q11-164. Refer to: • GP 11 How to Check a Sensor. • P/J101, HVF Control PWB • 311A-171 HVF Power Distribution RAP Install new components as necessary: • Buffer path sensor, PL 11.156 Item 2. • HVF control PWB, PL 11.157 Item 2. Enter dC330 code 011-079 to run the buffer feed motor 1, MOT11-079. MOT11-079 runs. Y↓N→Go to Flag 2. Check MOT11-079. Refer to: • GP 10 How to Check a Motor. • P/J102, HVF Control PWB • 311A-171 HVF Power Distribution RAP Install new components as necessary: • Buffer feed motor, PL 11.150 Item 1. • HVF control PWB, PL 11.157 Item 2 Check the drive belt on the motor. The drive belt is good. Y↓N→Install a new drive belt, PL 11.150 Item 9. The fault may be intermittent, check for damaged wiring or bad connectors. If necessary install new components: • Buffer path sensor, PL 11.156 Item 2.

← Xem tất cả mã lỗi Xerox WorkCentre 5890

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie