Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 311-320-00-120, 311-322-00-120 — Xerox WorkCentre 5890

Code: 311-320-00-120, 311-322-00-120

Description: Ejector Movement Failure RAP 311-320-00-120 The ejector is not at the home position. 311-322-00-120 The ejector fails to perform a cycle of operation. NOTE: A cycle of operation for the ejector is to move from the home position to the out position and back to the home position.
Remedy: NOTE: All 1K LCSS interlocks must be made to supply +24V to the motors. NOTE: For clarity, the 1K LCSS is shown removed from the machine. Enter dC330 code 011-322, ejector out sensor, Q11-322. Actuate Q11-322. The display changes. Y↓N→Go to Flag 2. Check Q11-322. Refer to: • 311F-120 1K LCSS PWB Damage RAP. • GP 11 How to Check a Sensor. •. • P/J8, 1K LCSS PWB • 311C-120 1K LCSS Power Distribution RAP. Install new components as necessary: • Ejector out sensor, PL 11.114 Item 3. • 1K LCSS PWB, PL 11.124 Item 1. Enter dC330 code 011-320, ejector home sensor, Q11-320. Actuate Q11-320. The display changes. Y↓N→Go to Flag 1. Check Q11-320. Refer to: • 311F-120 1K LCSS PWB Damage RAP. • GP 11 How to Check a Sensor. •. • P/J8, 1K LCSS PWB • 311C-120 1K LCSS Power Distribution RAP. Install new components as necessary: • Ejector home sensor, PL 11.114 Item 3. • 1K LCSS PWB, PL 11.124 Item 1. Enter dC330 code 011-023 to check the operation of the ejector motor, MOT11-020. MOT11- 020 runs. Y↓N→Go to Flag 3. Check MOT11-020. Refer to: • 311F-120 1K LCSS PWB Damage RAP. • GP 10, How to Check a Motor. •. • P/J15, 1K LCSS PWB • 311C-120 1K LCSS Power Distribution RAP. Install new components as necessary: • Ejector assembly, PL 11.114 Item 1. • 1K LCSS PWB, PL 11.124 Item 1. Enter dC330 code 011-023 ejector cycle, check the ejector cycles. Stack the code 011-320 ejector sensor home, then cycle the ejector. Stack the code 011-322 ejector sensor out, then cycle the ejector. The ejector actuates the ejector home sensor and the ejector out sensor. Y↓N→Refer to GP 7, check the following components; •. Pulley/drive gear, PL 11.114 Item 7. • Ejector belt, PL 11.114 Item 5. Install new components as necessary: • Pulley/drive gear, PL 11.114 Item 7. • Ejector belt, PL 11.114 Item 5. The ejector cycles noisily, colliding with the end stops. Y↓N→Check the stapler to ensure the staples are correctly formed, refer to the 311-364-00-120 Stapling Failure RAP. Mis-formed staples can cause the set to hang in the stapler causing ejector movement failures. The staples are correctly formed. Y↓N→Clear the staple head of any mis-formed staples, then check the operation of the stapler. If necessary, install a new staple head unit, PL 11.116 Item 5. If the ejector is still not moving, install a new ejector assembly, PL 11.114 Item 1. Perform SCP 5 Final Actions. Enter dC330 code 011-177, ejector motor encoder sensor, Q11-177. Actuate the sensor by slowly rotating the ejector motor. The display changes. Y↓N→Go to Flag 4. Check Q11-177. Refer to: • 311F-120 1K LCSS PWB Damage RAP. • GP 11 How to Check a Sensor. •. • P/J8, 1K LCSS PWB • 311C-120 1K LCSS Power Distribution RAP. Install new components as necessary: • Ejector motor encoder sensor, PL 11.114 Item 3. • 1K LCSS PWB, PL 11.124 Item 1. Perform the 311F-120 1K LCSS PWB Damage RAP, if necessary install a new 1K LCSS PWB, PL 11.124 Item 1.

← Xem tất cả mã lỗi Xerox WorkCentre 5890

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie