Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 311-380-00-171 — Xerox WorkCentre 5890

Code: 311-380-00-171

Description: HVF Punch Unit Paper Edge Detect RAP 311-380-00-171 The punch unit failed to detect the edge of the paper.
Remedy: Go to Flag 1. Check the wiring and repair as necessary. Check the paper edge sensor, Q11-380 and. Refer to: • GP 11 How to Check a Sensor. • P/J501, HVF Control PWB. • 311A-171 HVF Power Distribution RAP. Install new components as necessary: • HVF hole punch assembly, PL 11.153 Item 1. • HVF control PWB, PL 11.157 Item 2. Enter dC330 code 011-000, transport motor 1, MOT11-000. MOT11-000 runs. Y↓N→Go to Flag 2. Check the wiring and repair as necessary. Check transport motor 1, MOT11-000. Refer to: • GP 10 How to Check a Motor. • P/J102, HVF Control PWB. • 311A-171 HVF Power Distribution RAP. Install new components as necessary: • Transport motor 1, PL 11.150 Item 2. • HVF control PWB, PL 11.157 Item 2. Perform the following: • Decrease the downcurl on prints. Refer to ADJ 10.1. • Check the tension of the transport motor 1 belt, PL 11.150 Item 7. Refer to ADJ 11.10-171. • If the fault only occurs when paper is fed from tray 6, check the tray 6 alignment. Refer to ADJ 70.4. • Reload the software, GP 4.

← Xem tất cả mã lỗi Xerox WorkCentre 5890

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie