Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 311-450-00-171, 311-456-00-171 ... 311-459-00-171 — Xerox WorkCentre 5890

Code: 311-450-00-171, 311-456-00-171 ... 311-459-00-171

Description: HVF Ejector Module RAP 311-450-00-171 The ejector module motor has stalled 311-456-00-171 The ejector module did not return to the home position. 311-457-00-171 The ejector module did not move from the home position. 311-458-00-171 The ejector module did not return to the out position. 311-459-00-171 The ejector module did not move from the out position.
Remedy: Enter dC330 code 011-320, ejector home sensor, Q11-320. Stack the dC330 code 011-053 to move the stapler unit inboard, and observe the display. This action moves the stapler unit inboard, and moves the ejector module to the out position. The display changes. Y↓N→The ejector module moved to the out position. Y↓N→Go to Flag 2. Check the wiring and repair as necessary. Check the ejector unit motor, MOT11-023. Refer to: • GP 10 How to Check a Motor. • P/J802, HVF Control PWB. • 311A-171 HVF Power Distribution RAP. Install new components as necessary: • Ejector assembly, PL 11.140 Item 2. • HVF control PWB, PL 11.157 Item 2. Go to Flag 1. Check the wiring and repair as necessary. Check Q11-320. Refer to: • GP 11 How to Check a Sensor. • P/J401, HVF Control PWB. • 311A-171 HVF Power Distribution RAP. Install new components as necessary: • Ejector assembly, PL 11.140 Item 2. • HVF control PWB, PL 11.157 Item 2. Exit, then re-enter service mode. This returns the ejector module to the home position. Enter dC330 code, 11-322, ejector unit out sensor, Q11-322. Stack the dC330 code, 11-053 to move the stapler unit inboard. The display changes. Y↓N→Go to Flag 3. Check the wiring and repair as necessary. Check Q11-322. Refer to: • GP 11 How to Check a Sensor. • P/J401, HVF Control PWB. • 311A-171 HVF Power Distribution RAP. Install new components as necessary: • Ejector assembly, PL 11.140 Item 2. • HVF control PWB, PL 11.157 Item 2. Exit, then re-enter service mode. This returns the ejector module to the home position. Enter the dC330 code 011-177, ejector motor encoder, Q11-177. Stack the dC330 code 011-053 to move the stapler unit inboard. The display changes condition for a few seconds. Y↓N→Go to Flag 4. Check the wiring and repair as necessary. Check Q11-177. Refer to: • GP 10 How to Check a Motor. • P/J401, HVF Control PWB. • 311A-171 HVF Power Distribution RAP. Install new components as necessary: • Ejector assembly, PL 11.140 Item 2. • HVF control PWB, PL 11.157 Item 2. Perform SCP 5 Final Actions.

← Xem tất cả mã lỗi Xerox WorkCentre 5890

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie