Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 311J-171 — Xerox WorkCentre 5890

Code: 311J-171

Description: Inserter Paper Sensing and +5V Supply RAP Use this RAP to find the cause of inserter empty, inserter paper width and +5v supply problems.
Remedy: If a +5V supply problem is suspected, perform the following: Go to 311A-171 and check the 0V and +5V supply from the HVF control PWB to the inserter control PWB. Repair the wiring as necessary, or refer to 311A-171 HVF Power Distribution RAP. Install new components as necessary: • Inserter PWB, PL 11.179 Item 9. • HVF control PWB, PL 11.157 Item 2. To diagnose inserter paper sensing and paper width problems, perform the following: Enter the dC330 code 011-153, inserter unit empty sensor, Q11-153. Use a sheet of paper to actuate Q11-153. The sensor display changes. Y↓N→Go to Flag 1 and Flag 2. Check Q11-153. Refer to: • GP 11 How to Check a Sensor. • P/J8 and P/J4, Inserter PWB. • 311A-171 HVF Power Distribution RAP Install new component as necessary: • Unit empty sensor, PL 11.175 Item 11. • Inserter PWB, PL 11.179 Item 9. • HVF control PWB, PL 11.157 Item 2. Go to Flag 3 and Flag 4. Measure the voltage from the inserter paper width sensor 1, Q11-152, while sliding paper width guide. The voltage changes. Y↓N→Check Q11-152. Refer to: • GP 11 How to Check a Sensor. • P/J8 and P/J4, Inserter PWB. • 311A-171 HVF Power Distribution RAP. Install new components as necessary: • Inserter paper width sensor 1, PL 11.175 Item 13. • Inserter PWB, PL 11.179 Item 9. • HVF control PWB, PL 11.157 Item 2. Go to Flag 5 and Flag 6. Measure the voltage from the inserter paper width sensor 2, Q11-152 while sliding paper width guide. The voltage changes. Y↓N→Check Q11-152. Refer to: • GP 11 How to Check a Sensor. • P/J8 and P/J4, Inserter PWB. • 311A-171 HVF Power Distribution RAP. Install new components as necessary: • Inserter paper width sensor 2, PL 11.175 Item 13. • Inserter PWB, PL 11.179 Item 9. • HVF control PWB, PL 11.157 Item 2. Go to Flag 7 and Flag 8. Measure the voltage from the acceleration sensor, while actuating the sensor with paper. The voltage changes. Y↓N→Check the acceleration sensor. Refer To: • GP 11 How to check a Sensor. • P/J11 and P/J4, Inserter PWB. • 311A-171 HVF Power Distribution RAP. Install new components as necessary: • Acceleration sensor, PL 11.175 Item 10. • Inserter PWB, PL 11.179 Item 9. • HVF control PWB, PL 11.157 Item 2. Got to Flag 9 and Flag 10. Measure the voltage from the IDG pickup sensor while actuating the sensor with paper. The voltage changes. Y↓N→Check the IDG Pickup sensor. Refer to: • GP 11 How to check a Sensor. • P/J7 and P/J4, Inserter PWB. • 311A-171 HVF Power Distribution RAP. Install new components as necessary: • IDG pickup sensor, PL 11.179 Item 10. • Inserter PWB, PL 11.179 Item 9. • HVF control PWB, PL 11.157 Item 2. Perform SCP 5 Final Actions.

← Xem tất cả mã lỗi Xerox WorkCentre 5890

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie