Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 371B — Xerox WorkCentre 5890

Code: 371B

Description: Tray 1 and 2 Wrong Size Paper RAP Use this RAP when the paper fed from the tray does not match the paper size indicated by the tray paper size switch. Tray 1 and tray 2 feed mechanisms are identical.
Remedy: Check the relevant tray: • For tray 1, refer to Table 1. Compare the paper size in the tray to the size switches actuated. • For tray 2, refer to Table 2. Compare the paper size in the tray to the size switches actuated. Enter dC330 and the relevant component control codes as shown in the tables. Press Start. Manually actuate the paper size switches. The display changes each time the switches are actuated. Y↓N→For tray 1, go to Flag 1. For tray 2, go to Flag 2. Check the relevant size switch. Refer to: • GP 13 How to Check a Switch. •. •. • 301E +5V Distribution RAP. • 301B 0V Distribution RAP. If necessary, install a new tray 1 and 2 control PWB, PL 70.10 Item 2. Perform the following: • Check the relevant paper tray, PL 70.10 Item 26 or PL 70.10 Item 27. • Check the paper size leaf spring, PL 70.10 Item 3. • Check the relevant tray cam assembly, PL 70.10 Item 7. • Go to dC301 NVM Initialization. Perform the copier NVM initialisation.

← Xem tất cả mã lỗi Xerox WorkCentre 5890

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie