Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 381-106-00 — Xerox WorkCentre 5890

Code: 381-106-00

Description: Lead Edge Late to Tray 1 Feed Sensor RAP 381-106-00 The lead edge of the paper was late to tray 1 feed sensor when feeding from tray 2. The fault will also occur when feeding from tray 3 or tray 4 providing the trail edge of the sheet has cleared the tray 4 feed sensor.
Remedy: NOTE: The front door interlock must be cheated when checking +24V components. Enter dC330 code 081-101 tray 1 feed sensor, Q81-101. Press Start. Open the bypass tray and left door assembly. Manually actuate the sensor. The display changes. Y↓N→Go to Flag 1. Check Q81-101. Refer to: • GP 11 How to Check a Sensor. • P/J276, Tray 1 and 2 control PWB. • 301E +5V Distribution RAP. • 301B 0V Distribution RAP. Install new components as necessary: • Tray 1 feed sensor, PL 70.30 Item 24. • Tray 1 and 2 control PWB, PL 70.10 Item 2. Enter dC330 code 081-102 tray 2 feed sensor, Q81-102. Press Start. Manually actuate the sensor. The display changes. Y↓N→Go to Flag 2. Check Q81-102. Refer to: • GP 11 How to Check a Sensor. • P/J276, Tray 1 and 2 control PWB. • 301E +5V Distribution RAP. • 301B 0V Distribution RAP. Install new components as necessary: • Tray 2 feed sensor, PL 70.30 Item 24. • Tray 1 and 2 control PWB, PL 70.10 Item 2. Enter dC330 code 081-025 transport roll drives motor, MOT81-025. Press Start. The motor runs. Y↓N→Go to Flag 3. Check MOT81-025. Refer to: • GP 10 How to Check a Motor. • P/J273, Tray 1 and 2 control PWB. • 301G +24V Distribution RAP. • 301B 0V Distribution RAP. Install new components as necessary: • Transport roll drives motor, PL 80.25 Item 5. • Tray 1 and 2 control PWB, PL 70.10 Item 2. The transport rolls rotate. Y↓N→Check the drive belt and pulleys, PL 80.25 Item 2 and PL 80.25 Item 3. Refer to GP 7. Check the following, install new components as necessary: • The bearing, shaft and rolls on the transport roll assembly, PL 80.25 Item 8. • The idler rolls in the left door, PL 70.30 Item 2. • The transport drive belt, PL 80.25 Item 2.

← Xem tất cả mã lỗi Xerox WorkCentre 5890

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie