Description: SPDH Reg Sensor Failure RAP 305-340-00 The SPDH reg sensor failed to detect the lead edge of the document within the correct time. 305-341-00 The SPDH reg sensor detected a paper jam.
Remedy: Enter dC330, code 005-340, reg sensor, Q05-340. Open the SPDH. Actuate Q05- 340 using a strip of paper. The display changes. Y↓N→Go to Flag 1. Check Q05-340. Refer to: • GP 38 How to Check an Adaptive Sensor. • P/J467, SPDH PWB. • 301D +3.3V Distribution RAP. Install new components as necessary: • Reg sensor, PL 5.18 Item 11. • SPDH PWB, PL 5.10 Item 5. Remove the SPDH rear cover, PL 5.10 Item 1. Hold the top cover interlock switch closed. Enter dC330, code 005-030 to run the read motor, MOT05-030. The motor runs. Y↓N→Go to Flag 2. Check MOT05-030. Refer to: • GP 10 How to Check a Motor. • P/J468, SPDH PWB. • 301G +24V Distribution RAP. • 301B 0V Distribution RAP. Install new components as necessary: • Read motor, PL 5.18 Item 1. • SPDH PWB, PL 5.10 Item 5. Perform the steps that follow: • Check the items that follow. Refer to GP 7 Miscellaneous Checks: – Read motor belt, PL 5.19 Item 18. Perform ADJ 5.1. SPDH Drive Belts if necessary. – Mid scan drive belt, PL 5.19 Item 21. Perform ADJ 5.1. SPDH Drive Belts if necessary. – Pre scan drive belt, PL 5.19 Item 20. Perform ADJ 5.1. SPDH Drive Belts if necessary. – Pre scan roll assembly, PL 5.17 Item 4. – Pre scan roll drive pulley, PL 5.19 Item 12. – Mid scan roll drive pulley, PL 5.19 Item 13. • Check the pre scan roll static eliminator. • Ensure that the SPDH is connected to ground correctly. Refer to the 301A Ground Distribution RAP.