Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 305-342-00, 305-343-00 — Xerox WorkCentre 5945

Code: 305-342-00, 305-343-00

Description: SPDH Side 2 Reg Sensor Failure RAP 305-342-00 The SPDH side 2 reg sensor failed to detect the lead edge of the document within the correct time. 305-343-00 The SPDH side 2 reg sensor detected a paper jam.
Remedy: Enter dC330, code 005-343, side 2 reg sensor, Q05-343. Open the SPDH. Open and close the jam clearance baffle to actuate Q05-343. The display changes. Y↓N→Go to Flag 1. Check Q05-343. Refer to: • GP 38 How to Check an Adaptive Sensor. • P/J466, SPDH PWB. • 301D +3.3V Distribution RAP. Install new components as necessary: • Side 2 reg sensor, PL 60.30 Item 8. • SPDH PWB, PL 5.10 Item 5. Remove the SPDH rear cover, PL 5.10 Item 1. Hold the top cover interlock switch closed. Enter dC330, code 005-030 to run the read motor, MOT05-030. The motor runs. Y↓N→Go to Flag 2. Check MOT05-030. Refer to: • GP 10 How to Check a Motor. • P/J468, SPDH PWB. • 301G +24V Distribution RAP. • 301B 0V Distribution RAP. Install new components as necessary: • Read motor, PL 5.18 Item 1. • SPDH PWB, PL 5.10 Item 5. Perform the steps that follow: • Check the items that follow. Refer to GP 7 Miscellaneous Checks: – Read motor belt, PL 5.19 Item 18. Perform ADJ 5.1. SPDH Drive Belts if necessary. – Mid scan drive belt, PL 5.19 Item 21. Perform ADJ 5.1. SPDH Drive Belts if necessary. – Mid scan roll assembly, PL 5.17 Item 4. – Mid scan roll drive pulley, PL 5.19 Item 13. • Ensure that the SPDH is connected to ground correctly. Refer to the 301A Ground Distribution RAP.

← Xem tất cả mã lỗi Xerox WorkCentre 5945

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie