Description: SPDH No Original RAP 305-940-00 The SPDH doc present sensor detected that the original has been removed. 305-966-00 The SPDH doc present sensor detected that the original has not been fully inserted in the input tray. NOTE: Documents placed on the top cover of the SPDH can overhang the input tray and trigger the sensors. This can cause the SPDH to falsely detect a document, causing a feed error.
Remedy: • Remove all documents from the SPDH. • Check the condition of the originals. Curl or folds may prevent the originals being detected. • Check around the input tray. Remove any obstructions such as paper debris, staples, or paper clips. • Ensure that the document width guides are set correctly for the originals in use. Enter dC330, code 005-309, doc present sensor, Q05-309. Actuate Q05-309 using the doc present sensor actuator. The display changes. Y↓N→Go to Flag 1. Check Q05-309. Refer to: • GP 11 How to Check a Sensor. • P/J462, SPDH PWB. • 301D +3.3V Distribution RAP. • 301B 0V Distribution RAP. Install new components as necessary: • Doc present sensor, PL 5.30 Item 5. • SPDH PWB, PL 5.10 Item 5. Check that Q05-309, PL 5.30 Item 5 and the doc present sensor actuator, PL 5.30 Item 6 are correctly installed and undamaged.