Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 305-958-00 — Xerox WorkCentre 5945

Code: 305-958-00

Description: SPDH Lift Home Position Sensor Failure RAP 305-958-00 The lift home position sensor failed to sense the home position after the tray elevate motor drove the input tray to the home position.
Remedy: Enter dC330, code 005-390 to run the tray elevator motor, MOT05-390. The motor runs and cycles the tray between the raised and lowered positions. Y↓N→Remove the SPDH rear cover PL 5.10 Item 1. Remove the sensor bracket, PL 5.18 Item 10. Turn over the bracket to access the lift home position sensor. Enter dC330 code 005-307, lift home position sensor, Q05-307. Actuate Q05-307 using a piece of paper. The display changes. Y↓N→Go to Flag 1. Check Q05-307. Refer to: • GP 11 How to Check a Sensor. • P/J462, SPDH PWB. • 301D +3.3V Distribution RAP. • 301B 0V Distribution RAP. Install new components as necessary: • Lift home position sensor, PL 5.18 Item 9. • SPDH PWB, PL 5.10 Item 5. Enter dC330, code 005-309, doc present sensor, Q05-309. Actuate Q05-309 using the doc present sensor actuator. The display changes. Y↓N→Go to Flag 3. Check Q05-309. Refer to: • GP 11 How to Check a Sensor. • P/J462, SPDH PWB. • 301D +3.3V Distribution RAP. • 301B 0V Distribution RAP. Install new components as necessary: • Doc present sensor, PL 5.30 Item 5. • SPDH PWB, PL 5.10 Item 5. Open the top cover to access the stack height sensor, Q05-310. Enter dC330, code 005-310, stack height sensor, Q05-310. Actuate Q05-310 using the sensor actuating arm. The display changes. Y↓N→Go to Flag 4. Check Q05-310. Refer to: • GP 11 How to Check a Sensor. • P/J465, SPDH PWB. • 301D +3.3V Distribution RAP. • 301B 0V Distribution RAP. Install new components as necessary: • Stack height sensor, PL 5.20 Item 4. • Sensor actuating arm (part of top cover assembly, PL 5.20 Item 15). • SPDH PWB, PL 5.10 Item 5. Go to Flag 2. Check MOT05-390. Refer to: • GP 10 How to Check a Motor. • P/J469, SPDH PWB. • 301G +24V Distribution RAP. • 301B 0V Distribution RAP. Install new components as necessary: • Tray elevator motor, PL 5.18 Item 3. • SPDH PWB, PL 5.10 Item 5. Check the drive components between MOT05-390 and the input tray shaft assembly. If necessary install new tray elevator reduction gears, PL 5.19 Item 9. Perform SCP 5 Final actions.

← Xem tất cả mã lỗi Xerox WorkCentre 5945

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie