Description: Document Size Sensors Failure RAP Use this RAP when the SPDH is in the Auto Paper Select mode and fails to detect the correct size of paper.
Remedy: Refer to. Enter dC330, code 005-315 to check the length sensor 1, Q05-315, PL 5.30 Item 5. Actuate Q05-315. The display changes. Y↓N→Go to Flag 1. Check Q05-315. Refer to: • GP 11 How to Check a Sensor. • P/J462, SPDH PWB. • 301D +3.3V Distribution RAP. • 301B 0V Distribution RAP. Install new components as necessary: • Length sensor 1, PL 5.30 Item 5. • SPDH PWB, PL 5.10 Item 5. Enter dC330, code 005-320 to check the length sensor 2, Q05-320, PL 5.30 Item 9. Actuate Q05-320. The display changes. Y↓N→Go to Flag 2. Check Q05-320. Refer to: • GP 11 How to Check a Sensor. • P/J462, SPDH PWB. • 301D +3.3V Distribution RAP. • 301B 0V Distribution RAP. Install new components as necessary: • Length sensor 2, PL 5.30 Item 9. • SPDH PWB, PL 5.10 Item 5. Enter dC330, code 005-325 to check the width sensor 1, Q05-325, PL 5.30 Item 5. Actuate Q05-325. The display changes. Y↓N→Go to Flag 3. Check Q05-325. Refer to: • GP 11 How to Check a Sensor. • P/J463, SPDH PWB. • 301D +3.3V Distribution RAP. • 301B 0V Distribution RAP. Install new components as necessary: • Width sensor 1, PL 5.30 Item 5. • SPDH PWB, PL 5.10 Item 5. Enter dC330, code 005-326 to check the width sensor 2, Q05-326, PL 5.30 Item 5. Actuate Q05-326. The display changes. Y↓N→Go to Flag 4. Check Q05-326. Refer to: • GP 11 How to Check a Sensor. • P/J463, SPDH PWB. • 301D +3.3V Distribution RAP. • 301B 0V Distribution RAP. Install new components as necessary: • Width sensor 2, PL 5.30 Item 5. • SPDH PWB, PL 5.10 Item 5. Enter dC330, code 005-327 to check the width sensor 3, Q05-327, PL 5.30 Item 5. Actuate Q05-327. The display changes. Y↓N→Go to Flag 5. Check Q05-327. Refer to: • GP 11 How to Check a Sensor. • P/J463, SPDH PWB. • 301D +3.3V Distribution RAP. • 301B 0V Distribution RAP. Install new components as necessary: • Width sensor 3, PL 5.30 Item 5. • SPDH PWB, PL 5.10 Item 5. Enter dC131. Check that the IIT SPDH NVM parameters that follow are set to the default values: • 800-007, Detect Paper Size 1. • 800-008, Detect Paper Size 2. Install new components as necessary: • SPDH PWB, PL 5.10 Item 5. • SPDH input tray assembly, PL 5.30 Item 1.