Description: Damaged Documents RAP Use this RAP if the documents are damaged by the SPDH.
Remedy: Perform the steps that follow: 1. ADJ 5.2 SPDH Height. 2. Check the input tray assembly for damage, PL 5.30 Item 1. • Ensure that the document width guides move freely, PL 5.30 Item 2. • Check the restack arm for damage, PL 5.30 Item 7. 3. Open the SPDH top cover, PL 5.10 Item 8. • Check the document path for damage. • Check the takeaway roll assembly, PL 5.17 Item 1 and idlers for damage and contamination, refer to ADJ 5.4. • Check the feed roll, PL 5.20 Item 6, nudger roll, PL 5.20 Item 7 and retard roll, PL 5.25 Item 3 for contamination or damage, refer to ADJ 5.4 SPDH Cleaning Procedure. 4. Raise the SPDH. Lower the jam clearance baffle assembly. • Check for, and remove any pieces of paper. • Check the document path in the baffle area for damage. • Check the jam clearance baffle assembly for damage. • Check the mid scan roll, PL 5.17 Item 3 and the surrounding idlers for contamination or damage. Ensure that the roll and idlers are clean and rotate freely, ADJ 5.4 SPDH Cleaning Procedure. 5. Check the CVT ramp assembly for contamination or damage. 6. Check the exit roll assembly and idlers, PL 5.17 Item 2. Remove the input tray assembly to access the exit roll. 7. Remove the lower pre scan roller assembly. Check the pre scan roll assembly, PL 5.17 Item 4 and the lower pre scan rollers for contamination or damage. Ensure that the roll and idlers are clean and rotate freely, ADJ 5.4 SPDH Cleaning Procedure. 8. Ensure that the customer’s documents are within the specification, refer to GP 20.