Description: Paddle Roll Failure RAP 312-024-00-150 The paddle was not at the home position. 312-025-00-150 The paddle failed to rotate. NOTE: The paddle is in the home position when the sensor flag is located between the sensor jaws. If a jam occurs in the compiler, bin 1 will not be available.
Remedy: NOTE: All LVF BM interlocks must be made to supply +24V to the motors. Enter dC330, code 012-237, to run the paddle motor, MOT12-238, PL 12.335 Item 10. The paddle rotates correctly. Y↓N→Go to Flag 2. Check the paddle roll motor, MOT12-238. Refer to: • GP 10, How to Check a Motor. •. • P/J310, LVF PWB. • 312D-150 LVF BM Power Distribution RAP. Repair or install new components as necessary: • Paddle motor assembly, PL 12.335 Item 10. • LVF PWB, PL 12.425 Item 8. Enter dC330, code 012-186, paddle roll home sensor, Q12-186, PL 12.335 Item 4. Add the code 012-238, paddle roll motor run, to actuate Q12-186. The display cycles high/low. Y↓N→Go to Flag 1. Check Q12-186. Refer to: • GP 11, How to Check a Sensor. •. • P/J314, LVF PWB. • 312D-150 LVF BM Power Distribution RAP. Repair or install new components as necessary: • Paddle roll home sensor, PL 12.335 Item 4. • LVF PWB, PL 12.425 Item 8. Perform SCP 5 Final Actions.