Description: Hole Punch Operation Failure RAP 312-043-00-110 The hole punch failed to leave the home position within the required time. 312-046-00-110 The hole punch failed to return to the home position within the required time.
Remedy: Go to Flag 5. Check the link between P/J307 pins 10 and 11 on the 2K LCSS PWB. The link is good. Y↓N→Repair the wiring or connector as necessary. . Enter dC330 code 012-195 punch head present sensor, Q12-195. Actuate Q12-195. The display changes. Y↓N→Go to Flag 2. Check Q12-195. Refer to: • 312G-110 2K LCSS PWB Damage RAP. • GP 11 How to Check a Sensor. • P/J307, 2K LCSS PWB. • 312D-110 2K LCSS Power Distribution RAP. Install new components as necessary: • Punch head present sensor, PL 12.20 Item 1. • 2K LCSS PWB, PL 12.75 Item 1. Enter dC330 code 012-194 punch head home sensor, Q12-194. Actuate Q12-194. The display changes. Y↓N→Go to Flag 1. Check Q12-194. Refer to: • 312G-110 2K LCSS PWB Damage RAP. • GP 11 How to Check a Sensor. • P/J307, 2K LCSS PWB. • 312D-110 2K LCSS Power Distribution RAP. Install new components as necessary: • Punch head home sensor, PL 12.20 Item 1. • 2K LCSS PWB, PL 12.75 Item 1. Enter dC330 code 012-244, punch head run. The punch cycles. Y↓N→Go to Flag 3. Check the hole punch motor, MOT12-243. Refer to: • 312G-110 2K LCSS PWB Damage RAP. • GP 10, How to Check a Motor. • P/J311, 2K LCSS PWB. • 312D-110 2K LCSS Power Distribution RAP. Install new components as necessary: • Punch head motor assembly, PL 12.20 Item 2. • 2K LCSS PWB, PL 12.75 Item 1. NOTE: The chad bin collects the pieces of paper cut out by the hole punch. The chad bin level sensor will not operate if the tray is incorrectly installed. Ensure the chad bin is fully inserted and the lever engages in the slot. Enter dC330 code 012-193, chad bin level sensor, Q12-193. Use a piece of paper to actuate Q12-193. The display changes. Y↓N→Go to Flag 4. Check Q12-193. Refer to: • 312G-110 2K LCSS PWB Damage RAP. • GP 11 How to Check a Sensor. • P/J307, 2K LCSS PWB. • 312D-110 2K LCSS Power Distribution RAP. Install new components as necessary: • Chad bin level sensor, PL 12.20 Item 7. • 2K LCSS PWB, PL 12.75 Item 1. Perform SCP 5 Final Actions.