Description: Crease Roll Failure RAP 312-062-00-150 The crease roll motor failed to run.
Remedy: Check the parts that follow for damage: • Upper crease roll, PL 12.410 Item 2. • Lower crease roll, PL 12.410 Item 3. • Crease roll gearbox assembly, PL 12.415 Item 8. • Crease roll gear 1, PL 12.415 Item 1. • Crease roll gear 2, PL 12.415 Item 2. • Crease roll gear 3, PL 12.415 Item 3. • Crease roll gear 4, PL 12.415 Item 4. The parts are good. Y↓N→Install new components as necessary. Enter dC330 code 012-216, crease roll motor encoder sensor, Q12-216. Actuate Q12-216, by slowly rotating the crease roll handle. The display changes. Y↓N→Go to Flag 1. Check Q12-216. Refer to: • GP 11, How to Check a Sensor. • P/J112, LVF BM PWB. • 312D-150 LVF BM Power Distribution RAP. Install new components as necessary: • LVF BM PWB, PL 12.425 Item 1. • Crease roll motor encoder sensor, PL 12.415 Item 7. Enter dC330 code 012-253 to run the crease roll motor, MOT12-253. The motor runs. Y↓N→Go to Flag 2, MOT12-253. Refer to: • GP 10, How to Check a Motor. • P/J103, LVF BM PWB. • 312D-150 LVF BM Power Distribution RAP. Install new components as necessary: • LVF BM PWB, PL 12.425 Item 1. • Crease roll motor, PL 12.415 Item 5. The fault may be intermittent. Check for damaged wiring or connectors. If necessary repair the wiring, or install new components.