Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 312-340-00-150, 312-342-00-150 — Xerox WorkCentre 5945

Code: 312-340-00-150, 312-342-00-150

Description: Ejector Movement Failure RAP 312-340-00-150 The ejector was not at the home position. 312-342-00-150 The ejector failed to perform a cycle of operation. NOTE: A cycle of operation for the ejector is to cycle from the home position to the out position and back to the home position.
Remedy: NOTE: All LVF BM interlocks must be made to supply +24V to the motors. Enter dC330, code 012-185, ejector out sensor, Q12-185. Actuate Q12-185. The display changes. Y↓N→Go to Flag 2. Check Q12-185. Refer to: • GP 11 How to Check a Sensor. •. • P/J304, LVF PWB. • 312D-150 LVF BM Power Distribution RAP. Repair or install new components as necessary: • Ejector out sensor, PL 12.360 Item 3. • LVF PWB, PL 12.425 Item 8. Enter dC330, code 012-184, ejector home sensor, Q12-184. Actuate Q12-184. The display changes. Y↓N→Go to Flag 1. Check Q12-184. Refer to: • GP 11 How to Check a Sensor. •. • P/J304, LVF PWB. • 312D-150 LVF BM Power Distribution RAP. Repair or install new components as necessary: • Ejector home sensor, PL 12.360 Item 3. • LVF PWB, PL 12.425 Item 8. Enter dC330, code 012-236, ejector motor cycle. Check the operation of the ejector motor, MOT12-234. The motor runs. Y↓N→Go to Flag 3. Check MOT12-234. Refer to: • GP 10, How to Check a Motor. •. • P/J303, LVF PWB. • 312D-150 LVF BM Power Distribution RAP. Repair or Install new components as necessary: • Ejector assembly, PL 12.360 Item 1. • LVF PWB, PL 12.425 Item 8. Enter dC330, code 012-236, ejector motor cycle. Check the ejector cycles. Add the code 12- 184, ejector sensor home, Q12-184. Then cycle the ejector. Add the code 12-185, ejector out sensor, Q12-185. Then cycle the ejector. The ejector actuates the ejector home sensor and the ejector out sensor. Y↓N→Refer to GP 7, check the components that follow, install new components as necessary; • Pulley drive gear, PL 12.360 Item 8. • Ejector belt, PL 12.360 Item 5. The ejector cycles noisily, colliding with the end stops. Y↓N→Check the stapler to ensure the staples are correctly formed. Mis-formed staples can cause the set to hang in the stapler causing ejector movement failures. The staples are correctly formed. Y↓N→Clear the staple head of any mis-formed staples. Then check the operation of the stapler. If necessary, install a new staple head unit, PL 12.365 Item 5. If the ejector is still not moving, install a new ejector assembly, PL 12.360 Item 1. Perform SCP 5 Final Actions. Enter dC330, code 012-096, ejector motor encoder sensor, Q12-096. Actuate Q12-096. The display changes. Y↓N→Go to Flag 4. Check Q12-096. Refer to: • GP 11 How to Check a Sensor. •. • P/J304, LVF PWB. • 312D-150 LVF BM Power Distribution RAP. Repair or install new components as necessary: • Ejector motor encoder sensor, Q12-096, PL 12.360 Item 3. • LVF PWB, PL 12.425 Item 8. Perform SCP 5 Final Actions.

← Xem tất cả mã lỗi Xerox WorkCentre 5945

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie