Description: Rear Tamper Move Failure RAP 312-396-00-150 The rear tamper failed to move from the home position. 312-397-00-150 The rear tamper failed to return to the home position. 312-398-00-150 The rear tamper failed to move from the away from home position. NOTE: The away home position is with the rear tamper approximately halfway along it’s travel.
Remedy: NOTE: All LVF BM interlocks must be made to supply +24V to the motors. Enter dC330, codes 12-227, rear tamper home and 12-229, rear tamper move alternately. The rear tamper moves between the home and inboard positions. Y↓N→Go to Flag 3. Check the rear tamper motor, MOT12-227. Refer to: • GP 10, How to Check a Motor. • P/J312, LVF PWB. • 312D-150 LVF BM Power Distribution RAP. Repair or install new components as necessary: • Tamper assembly, PL 12.355 Item 1. • LVF PWB, PL 12.425 Item 8. Enter dC330 code 012-181, rear tamper home sensor, Q12-181. Actuate Q12-181. The display changes. Y↓N→Go to Flag 1. Check Q12-181. Refer to: • GP 11, How to Check a Sensor. • P/J312, LVF PWB. • 312D-150 LVF BM Power Distribution RAP. Repair or install new components as necessary: • Rear tamper home sensor, PL 12.355 Item 3. • LVF PWB, PL 12.425 Item 8. NOTE: The away position is used for short edge feed small paper. This saves unnecessary rear tamper travel. Enter dC330, code 012-183, rear tamper away sensor, Q12-183. Actuate Q12-183. The display changes. Y↓N→Go to Flag 2. Check Q12-183. Refer to: • GP 11, How to Check a Sensor. • P/J312, LVF PWB. • 312D-150 LVF BM Power Distribution RAP. Repair or install new components as necessary: • Rear tamper away sensor, PL 12.355 Item 3. • LVF PWB, PL 12.425 Item 8. Perform SCP 5 Final Actions.