Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 312C-110 — Xerox WorkCentre 5945

Code: 312C-110

Description: 2K LCSS Initialization Failure RAP When an initialization command is received from the machine, the units are initialized in 2 stages: • The units that follow are initialized sequentially: 1. If the staple head is not at the home position, it is driven to the home position. 2. If the stapling unit is not at the home position, it is driven to the home position. NOTE: The staple cartridge must be fully pushed home. 3. If the ejector is not at the home position, it is driven to the home position. • The units that follow are then initialized simultaneously: 1. If the front tamper is not at the home position, it is driven to the home position. 2. If the rear tamper is not at the home position, it is driven to the home position. 3. If the hole punch is not at the home position, it is driven to the home position. 4. If the paddle is not at the home position, it is driven to the home position. 5. If the stacker is not at the home position, it is driven to the home position.
Remedy: Check the fuse on the 2K LCSS PWB, If the fuse (F1) is good, continue at the procedure. If the fuse not good, perform the 312G-110 2K LCSS PWB Damage RAP. If necessary install a new 2K LCSS PWB, PL 12.75 Item 1. Remove the 2K LCSS rear cover-110. Check the 2K LCSS PWB DIP switch settings. Refer to the 312F-110 2K LCSS PWB DIP Switch Settings RAP. Remove the 2K LCSS top cover, front door cover assembly-110, so that the units can be viewed. Cheat the front door interlock switch and the top cover interlock switch. Check that LED 2 is illuminated. This shows that all interlocks are made. If the LED fails to illuminate, go to 312-310-00-110, 312-312-00-110, 312-313-00-110 Interlocks RAP. Procedure. Check that the software heartbeat is present. LED 1 should flash twice per second when the 2K LCSS software is running. If necessary reload the 2K LCSS software, GP 4. If the initialization sequence fails to place any unit at the home position, refer to the appropriate RAPs: • The front tamper is not at the home position, refer to 312-392-00-110, 312-393-00-110, 312-394-00-110 Front Tamper Move Failure RAP. • The rear tamper is not at the home position, refer to 312-396-00-110, 312-397-00-110, 312-398-00-110 Rear Tamper Move Failure RAP. • The paddle is not at the home position, refer to 312-024-00-110, 312-025-00-110 Paddle Roll Failure RAP. • Bin 1 is not at the home position, refer to 312-462-00-110 Bin 1 Movement Failures RAP • The hole punch is not at the home position, refer to 312-043-00-110, 312-046-00-110 Hole Punch Operation Failure RAP. • The staple head is not at the home position, refer to 312E-110 Staple Head Operation Failure RAP. • The stapling unit is not at the home position, refer to 312-371-00-110, 312-372-00-110, 312-378-00-110 Staple Head Unit Movement Failure RAP. • The ejector is not at the home position, refer to 312-340-00-110, 312-341-00-110, 312- 342-00-110 Ejector Movement Failure RAP.

← Xem tất cả mã lỗi Xerox WorkCentre 5945

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie