Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 312J-150 — Xerox WorkCentre 5945

Code: 312J-150

Description: Booklet Quality RAP Use this RAP to identify and correct the causes of poor booklet quality in the LVF BM. The booklet quality problems that follow are covered in this RAP: • The alignment of the top and bottom edges of the booklet are not within specification. • The alignment of the open side edges of the booklet are not within specification. • The booklet staples are badly formed. • The booklet crease is off centre. • The booklet crease is skewed greater than the specification. • The booklet staple position is not within the specification. • The booklet is not sufficiently creased.
Remedy: • Check that the paper loaded in the paper trays matches the paper size displayed on the UI. Refer to 371-500-00 Tray 1 Open During Run RAP and 372-500-00 Tray 2 Open During Run RAP. • Ensure that the paper being fed to the BM conforms to the specification, GP 20 Paper and Media Size Specification. • Ensure that the booklets being produced do not exceed the maximum contents given in Table1.
Media Media weight Maximum number of sheets Maximum number of booklet pages Maximum number of unstapled sheets
Plain paper 60 to 80gsm (16 to 21lb bond) 15 60 5 Heavyweight 90gsm (24lb bond) 13 52 - Heavyweight 120gsm (32lb bond) 10 40 - Heavyweight 160gsm (43lb bond) 7 28 - Heavyweight 216gsm (58lb bond) 2 8 - Plain paper with heavyweight cover 60 to 80gsm (16 to 21lb bond) with 160gsm (43lb bond) cover 14 including 1 cover 56 -

← Xem tất cả mã lỗi Xerox WorkCentre 5945

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie